Weld & Rust Repair in Highland Park, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Weld & Rust Repair in Highland Park, TX

If your gate is sagging, dragging on the driveway, or showing deep, flaking rust at the joints, you need on-site weld and rust repair before the entire structure fails. Most gate issues in Highland Park start with structural integrity problems that a simple motor adjustment cannot fix, and we handle these repairs right in your driveway so you don’t have to haul a heavy gate to a fabrication shop. At Gatewood Fence & Gate, I have been performing structural welding and metal restoration since 2001, focusing on fixing what others suggest replacing. If you are noticing your gate hardware pulling away from the post or visible corrosion eating through the steel, call us at (325) 936-1371 for an honest assessment. We specialize in bringing structural stability back to your entryway, and for more general maintenance, you can always check our main Gate Repair in Highland Park page.

When You Need Weld & Rust Repair

Highland Park weather is hard on metal. Between the humidity that accelerates oxidation and the shifting clay soil that puts extra torque on gate hinges, your fence and gate take a beating. You do not always need a brand-new gate, but you do need to catch these signs early and consider our Gate Repair services before the metal fatigues to the point of no return.

• Sagging Gate Leaves: If your gate leaves are dragging on the pavement or no longer meet in the center, the hinge plates have likely broken their welds or the mounting post has shifted. I often see this in older properties where the concrete footing has settled slightly over the years.
• Visible Corrosion at Joints: Rust is not just cosmetic; it is a structural disease. If you can chip away flakes of metal with a screwdriver at the weld points or hinge attachments, the steel is compromised and needs to be ground down and re-welded to maintain safety.
• Failed or Snapped Hinges: When a hinge pin snaps or the hinge plate tears away from the gate frame, it is usually because the original weld was too brittle or was never properly sealed against the elements. We cut out the old, compromised metal and weld in fresh steel plates to restore the pivot point.
• Hardware Pulling Away from the Frame: If your gate opener arm is vibrating or shaking the mounting bracket, the weld may be cracking. This puts excessive strain on systems like your Viking or Linear openers, leading to premature motor failure that could have been avoided with a simple weld repair.
• Loose or Rattling Pickets: If your gate sounds like a tambourine when it opens or closes, the decorative or structural pickets have broken their tack welds. We go through and re-tack these to stop the vibration and prevent the rust from spreading further into the frame.

Our Weld & Rust Repair Process

I do not believe in taking your gate off-site unless it is absolutely necessary, which is rarely the case. My approach to weld and rust repair is about restoring the structural connection permanently so you do not have to call me back for the same issue next year. Here is how I handle the work:

1. Site Inspection and Structural Assessment: I arrive on-site to determine if the failure is caused by a bad weld, rusted-through metal, or a post that has shifted in the ground. If the metal is too far gone, I will tell you straight; I will not waste your money welding to thin, rusted steel that will not hold.
2. Grinding and Surface Preparation: To get a solid weld, you have to get down to clean, bare metal. I use heavy-duty grinders to remove the rust, flaking paint, and compromised steel around the failure point, ensuring the new weld has a clean surface to bond with.
3. Structural Re-Welding: Using professional-grade welding equipment, I fuse the components back together. Unlike a quick tack weld, I ensure the bead is deep and structural, reinforcing the area to handle the weight and movement of the gate.
4. Rust Prevention and Sealing: Once the weld is cool, I grind it smooth and apply a heavy-duty, rust-inhibiting primer and matching paint. This seals the metal from the Highland Park humidity, preventing the rust from returning to the same spot.
5. Functional Testing: We cycle the gate multiple times to ensure the alignment is correct and the weight is distributed properly across the hinges and rollers. If the gate doesn’t move smoothly, the repair isn’t finished.

Weld & Rust Repair Pricing in Highland Park

I provide honest, upfront pricing so you know exactly what you are paying before we strike an arc. Because every gate is different-some are lightweight aluminum, others are heavy-duty wrought iron-the cost depends on the severity of the rust and the amount of steel that needs to be replaced. We offer a free second opinion on any written estimate you have already received, and we apply a $40 discount to any repair over $200. We also keep a permanent 10% discount for seniors and veterans.

If you have a gate that is failing, call (325) 936-1371 for a free estimate. We do not charge trip fees for jobs within the county, and I am happy to come out, look at the damage, and give you a straight answer on whether it is worth fixing or if you are better off with a different solution.

FAQs - Weld & Rust Repair

Can you fix a gate that is dragging on the ground?

Yes, but the drag is usually a symptom of a failed hinge or a shifted post, not the gate itself. We will inspect the structural welds at the base and the hinge points, re-weld the connection, and perform Gate Realignment to ensure it clears your driveway. If your gate is dragging, call (325) 936-1371 to get it fixed before the friction ruins your gate opener motor.

Is it cheaper to repair or replace a rusted gate?

In most cases, repair is significantly cheaper than replacing the entire gate system, provided the core frame is still solid. I am honest about this-if I see that the rust has eaten through the main structural uprights to the point where welding would be unsafe, I will tell you it is time to replace it. However, most gates in Highland Park just need a localized repair to get another 5 to 10 years of life.

Do you need electricity at my property to weld?

I bring professional-grade equipment for Electric Gate Repair and welding right in your driveway, even if you do not have an outdoor power outlet near the gate. I have been doing this since 2001, and I come prepared to handle the job without needing to run extension cords through your house or garage.

How long does a weld repair last?

A properly executed weld, when cleaned, sealed, and painted against the elements, should last as long as the rest of the gate. Because I use structural-grade welding and treat the metal to prevent further oxidation, I stand behind my work with our 90-Day Done Right Promise. If the weld fails within that time, I will come back and fix it at no charge.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park.