Gate Realignment in Highland Park, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Gate Realignment in Highland Park, TX

Our gate repair cost in Dallas, TX for realignment in Highland Park typically runs between $250 and $550, depending on the severity of the sag and whether the hinge post itself needs reinforcing. If your gate is dragging on the driveway or won’t latch because the strike plate has shifted, we can usually get it moving properly in a single visit, often on the same day you call. You can reach us at (325) 936-1371 to get an accurate estimate for your specific driveway.

I’m Hal Gatewood, and I’ve been fixing gates since 2001. Around Highland Park, I see a lot of the same issues. Our North Texas soil moves, and when the ground shifts, your fence posts shift with it. A gate is only as strong as its foundation, and when that post leans even a fraction of an inch, your gate drops. You don’t need a new gate; you need someone who understands how to correct the geometry of the existing one. Most of the time, I can fix this right in your driveway without hauling your gate off to a shop. If you are looking for Gate Repair in Highland Park, you are in the right place, but specifically for alignment, we focus on the structural integrity of the hinge points and the latch mechanism.

My shop is local, my name is on the work, and I operate on a simple principle: if I wouldn’t put my name on it, I won’t do it. We don’t use dispatch centers or call queues. When you call (325) 936-1371, you get a live person who actually knows how these systems function. Whether you are running a Viking operator or a simple manual swing gate, our gate repair services come with our 90-Day Done Right Promise on every alignment job we touch.

When You Need Gate Realignment

You don’t always need a complete tear-down when a gate stops working. Often, it is just a matter of mechanical adjustment. Here are the signs that your gate needs professional realignment before the damage gets worse:

• The Gate Drags on the Driveway: If you see a fresh arc or scratch in your concrete or pavers, your hinge posts have likely settled or twisted. Ignoring this puts massive strain on your gate motor, which can lead to a burnt-out capacitor or motor failure.
• Latch Misalignment: When the latch pin misses the strike plate by even a half-inch, it’s a sign the gate has sagged. In Highland Park, we see this often after heavy spring rains when the ground softens and shifts the post foundation.
• Visible Gap at the Hinge Side: If you see a growing gap between the gate frame and the post, the hinges are likely pulling out or the post is bending. This is a safety risk, especially if you have children or pets relying on that gate to stay put.
• The Gate “Bounces” or Swings Open: If your swing gate doesn’t stay closed or feels like it’s floating, the hinges are likely out of plumb. A properly aligned gate should hold its position when you let go of it.
• Motor Strain or Grinding Noises: If your operator is working harder than it used to, it’s often fighting the weight of a misaligned gate. It’s better to pay for a realignment than to replace a motor like a BFT or Linear unit prematurely.

If you see any of these issues, don’t wait until the hinge snaps off entirely. Give us a call at (325) 936-1371. We offer free second opinions on any written estimate you’ve already received, and we’ll tell you straight if it’s a simple adjustment or if the post needs a more permanent fix.

Our Gate Realignment Process

I don’t believe in “patching” a problem that will just come back next season. When I come out to look at your gate, I follow a specific sequence to ensure the fix lasts. We are a home service company that values precision over speed.

1. Structural Assessment: I start by checking the hinge post. If the post is rotting or the concrete footing has cracked, no amount of adjustment will fix the gate long-term. I look for the root cause-not just the symptom.
2. Hinge Inspection: I examine the mounting hardware. Often, the bolts have loosened over time or the weld has fatigued. I check brands like Ghost Controls and Viking to see if the hardware is compatible with the gate weight.
3. On-Site Welding and Fabrication: If the frame has twisted or the hinges have pulled away, I bring the welder to your driveway. We don’t haul your gate away unless absolutely necessary. We reinforce the frame on the spot so the gate hangs true again.
4. Leveling and Plumbing: Using professional levels, I reset the gate so it hangs perfectly plumb. This takes the load off your gate operator, letting it run smoothly without fighting gravity.
5. Latch Tuning: Finally, I adjust the latch or the electronic strike to ensure it catches every single time, without slamming or binding.

Safety is the priority here. A heavy gate that isn’t aligned correctly is a massive danger to children and pets. If your gate is hanging by a thread, keep people away from it and call us immediately. We specialize in safe, durable repairs.

Gate Realignment Pricing in Highland Park

I believe in upfront pricing. You won’t find us showing up and suddenly discovering “hidden” fees. We provide clear, honest costs for our labor and materials. Because we are locally owned, we don’t have the overhead of a national franchise, which keeps our prices fair for our neighbors.

Remember, we offer a $40 discount on any repair over $200. If you are a senior or a veteran, that’s a permanent 10% discount on the total bill. We also charge no trip fee inside the county. If you have a written estimate from another company, call us at (325) 936-1371 for a free second opinion. I’ll tell you if you’re being overcharged or if they are trying to sell you parts you don’t actually need.

FAQs - Gate Realignment

Can you fix my gate if it’s dragging on the driveway?

Yes, we can almost always fix a dragging gate by realigning the hinge posts or adjusting the hinge hardware. The drag usually happens because the post has shifted or the gate frame has lost its square, and we use on-site welding to stiffen the frame and lift the gate back into its proper position. Call (325) 936-1371 and we can get you on the schedule to stop the damage to your driveway.

Is it cheaper to repair or replace my gate?

In the vast majority of cases, it is significantly cheaper to repair an existing gate than to replace the entire system-see how much does gate repair cost? (2026 Price Guide) - Highland Park, TX for typical pricing. Unless the gate frame is severely rusted through or the post footing has completely failed, we can usually restore the original gate to full working order for a fraction of the cost of a new install. We provide honest advice-if I think it’s a waste of money to fix, I will tell you.

Do you work on all gate brands?

We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Regardless of the brand, the mechanical principles of alignment remain the same, and we have the tools to handle the hardware and the welding required for almost any setup.

How quickly can you come out to Highland Park?

We prioritize urgent gate issues because we know a broken gate is a security risk for your home. We offer same-day or next-day service for most repairs, and because we are local, we aren’t stuck in traffic coming from across the state. When you call (325) 936-1371, you’ll talk to a real person who can give you a realistic window for when we can get out there.

My name is on the shop, and the shop is right down the road. That is the oldest accountability there is. If you need a gate that actually works, call us at (325) 936-1371 for a free estimate. We show up when we say we will, and we do the job right the first time.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park.