Electric Gate Repair in Highland Park, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in Highland Park, TX

Our Gate Repair services in Highland Park typically cost between $180 and $450 depending on whether the issue is a simple sensor misalignment or a failing control board. Most repairs can be completed in a single visit, but the final price depends on the specific hardware brand and the complexity of the electrical fault. If your gate is stuck, making grinding noises, or simply refusing to respond to your remote, call (325) 936-1371 for a straightforward assessment.

I have been doing gate repair in Highland Park since 2001, and if there is one thing I have learned, it is that most electric gate issues are not as complicated as the big national companies want you to believe. They often try to push a full motor replacement because it is easier for them than troubleshooting a circuit board or a bad safety eye. That is not how we operate at Gatewood Fence & Gate. I believe in fixing what is broken, not selling you parts you do not need. When you call us, you are speaking to a real person, not a dispatch queue or a call center three states away. We are locally owned and owner-operated, which means when you have a problem with your gate, you call me, and I make sure it gets sorted out according to our 90-Day Done Right Promise.

Whether you have a high-traffic entry system or a residential driveway gate, we service all major brands, including BFT, Linear, and Viking. We handle everything from burnt-out capacitors and faulty loop detectors to issues with the gate arm itself. If you are tired of dealing with companies that treat you like a ticket number, give us a call. My name is on the shop, and I stand behind every job we do.

When You Need Electric Gate Repair

You know your gate better than anyone. When it starts acting up, it usually gives you a few warning signs before it stops working entirely. In Highland Park, we see a lot of wear and tear caused by our local weather patterns, which can wreak havoc on sensitive electrical components. Here are the most common signs that it is time to call for a repair:

• The gate starts, then reverses immediately: This is almost always a safety sensor issue. If the infrared eyes are dirty, misaligned, or failing, the gate thinks there is an obstruction and refuses to close.
• Grinding or clicking sounds: If you hear metal-on-metal scraping or a rapid clicking from the control box, you likely have a gear failure or a failing relay. Do not force it, as that can snap the drive chain or strip the gears further.
• Intermittent response: When your remote works sometimes but not others, it could be a signal interference issue or a dying battery in the receiver. We can test the signal strength to see if it is the remote or the logic board.
• The gate moves slower than usual: A sluggish gate often points to a failing capacitor or a lack of lubrication in the hinge points. If the motor is working harder than it needs to, it will burn out much faster.
• The gate stays open or stuck closed: This is a security risk for your home. If your gate is stuck, do not try to manually force it open if you have an automatic lock engaged, as you could damage the internal clutch.

If you notice any of these, call (325) 936-1371. We provide a free second opinion on any written estimate you have already received, so you can be sure you are not overpaying for unnecessary parts.

Our Electric Gate Repair Process

I do not believe in guessing. When I arrive at your property, I follow a systematic approach to identify the root cause of the failure. I have seen too many “technicians” swap out a motherboard only to find out a loose wire was the real culprit. We do it right the first time.

1. Initial Assessment and Safety Check: Before touching anything, I inspect the gate for mechanical binding. If the gate itself is heavy or dragging on the ground, the motor will eventually fail. We check the physical balance of the gate first.
2. Electrical Diagnostics: We test the power supply, the transformer, and the logic board. We use a multimeter to check for consistent voltage. Often, a simple fuse or a loose connection is the only thing standing between you and a working gate.
3. Component Troubleshooting: If the power is fine, we check the gate accessories. This includes the safety eyes, loop detectors, and the receiver. If we are working on a system like Ghost Controls, we check the specific parameters of that board to ensure it is programmed correctly.
4. On-Site Repair or Replacement: Because we have a fully equipped shop, we can often perform on-site welding or custom bracket fabrication right in your driveway. We do not need to haul your gate away to fix a broken hinge or a mounting plate.
5. Testing and Calibration: We cycle the gate multiple times to ensure the travel limits are set correctly. A gate that slams shut is a gate that will break again soon. We calibrate the soft-start and soft-stop features to ensure smooth operation.

Note: If you have high-tension springs or complex electrical panels, please keep hands and fingers clear. These systems can be dangerous if handled incorrectly. If you are unsure what you are looking at, just call us. It is safer to have a professional handle the electrical troubleshooting.

Electric Gate Repair Pricing in Highland Park

We believe in upfront, honest pricing. You will never see hidden “trip charges” on our invoices when we are working within the county, and we offer a $40 discount on any repair over $200. We also keep a permanent 10% discount for seniors and veterans because we appreciate the people who have built this community.

If you have a written estimate from another company, show it to me. I will provide a free second opinion, and if I can fix it for less or do a better job, I will tell you. To get an accurate quote for your specific gate, call (325) 936-1371.

FAQs - Electric Gate Repair

How much does electric gate repair cost in Highland Park?

Most repairs for electric gate systems in Highland Park fall between $180 and $450, depending on whether the issue is a minor sensor adjustment or a more involved mechanical repair like replacing a drive gear. See How Much Does Gate Repair Cost? (2026 Price Guide) - Highland Park, TX for more details. We always provide a clear estimate before we start any work, and we offer $40 off any repair over $200. Call (325) 936-1371 to discuss your specific gate issues.

Can you fix my gate today?

We prioritize urgent gate issues because we know that an open gate is a security concern for your home and family. While we cannot guarantee same-day service for every single call, we do our best to get to Highland Park residents quickly. Because we are locally owned and owner-operated, we are not tied to a rigid, slow-moving corporate schedule. Call us as early as possible to see if we can fit you into the rotation.

Is it cheaper to repair or replace my gate motor?

In almost every case, repairing the motor is more cost-effective than replacing the entire system. Many companies push for a full replacement because it is a higher-ticket sale for them, but we specialize in component-level repair. If the motor casing is intact and the gears are salvageable, we can usually restore operation for a fraction of the cost of a new unit. We will give you an honest recommendation on whether a repair makes long-term sense.

Do you work on my brand of gate opener?

We are certified to service nine major gate brands, including BFT, Linear, Viking, and Ghost Controls. Because we have been in the business since 2001, we have worked on almost every type of operator currently installed in Texas. If you have an older model that parts are no longer made for, we can often fabricate custom solutions or adapt the system to accept modern components. Call (325) 936-1371 to confirm we can help with your specific brand.

When you need your gate running smoothly again, you do not need a slick sales pitch. You need someone who knows how to open the box, find the short, and fix the connection. That is exactly what we do at Gatewood Fence & Gate. We have been serving this community for over 29 years, and we plan on being here for many more. If you are ready for a repair that lasts, call (325) 936-1371 for a free estimate or to ask a question about your home gate system.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park.