Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Richardson
If your Richardson gate is sagging, refusing to latch, or the hinge post has started leaning toward the alley after this year’s soil shifts, we can usually have someone in front of it the same day you call. Our crew works the full span of Richardson, from the ranch-style streets off Arapaho Road to the corporate entrances along US-75, and we carry common gate hardware, replacement posts, and welding equipment on the truck so the gate stays in your driveway instead of getting hauled to a shop. Call (325) 936-1371 and you’ll get Hal or a member of his crew, not a phone tree.
Richardson’s Blackland Prairie clay doesn’t just drain water slowly. It heaves and shrinks like a breathing chest all year, and the cedar hinge posts that were set 40 years ago were never deep enough for what that soil would eventually do to them. That’s the reason we do so many on-site post repairs and custom welding jobs here, and it’s the reason we’re not going to tell you the panel is the problem when the post is what moved. Gate Parts & Welding is what we do every day, and half of it is figuring out what actually failed before we pick up a tool.
Why Gatewood Fence & Gate Is Richardson’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 because he got tired of seeing gates that were “fixed” with shims and washers, then re-sagged the next season. More than 29 years in the trade, and the shop is still owner-operated with Hal’s name on every invoice. When a Richardson customer calls, the person who answers is a live person, any time of day, and the person who shows up to look at the job is someone who has seen that exact failure pattern before, usually on a street just like yours.
The part of Richardson we find ourselves in most often is the residential band between Arapaho Road and Renner Road, where board-on-board cedar gates from the 70s and 80s are now at the age where post bases rot out and hinges pull right off the wood. We’ve also spent plenty of early mornings at tech and telecom campuses up and down US-75, welding operator mounts and replacing rollers on commercial slide gates that cycle hundreds of times a day. One crew that can do both is rare, but Richardson’s mix of old ranch houses and corporate entrances basically demands it. Every job, residential or commercial, carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back, no runaround.
Our Gate Parts & Welding Services in Richardson
Hinge Replacement
If your cedar gate drags on the latch side or won’t stay closed, the hinge is often the first thing to fail, but not always the first thing to fix. In Richardson, we see hinges torn out of posts that the clay has twisted out of plumb, and putting new hardware into a moving post means you’ll be doing it again next spring. We replace hinges and hinge brackets on wood, iron, and aluminum gates, and we’ll tell you straight if the post needs attention first. Call us for a free estimate, and you’ll get a price before any work starts, not after.
Post Replacement
Gate posts in Richardson carry more load than the gate itself. The Blackland Prairie clay cycles through wet winters and scorching dry summers, pulling posts up, down, and sideways until the frame racks and the latch won’t catch. We cut out failed posts, set new ones with deeper footings and proper drainage, and often re-weld the base connection rather than relying on a few rusted bolts. If your post is leaning two inches off plumb and the gate panel is still square, that post is the job, not a hinge swap.
Rail Repair
Rails on aging Richardson gates take abuse from both the weather and the hardware. A warped or rotted rail changes the whole frame’s geometry, which means the gate binds when it swings and stress concentrates at the hinge side. We repair or replace gate rails, straighten what can be straightened, and weld cracked joints on site. For ornamental iron gates in HOA-governed neighborhoods, we match the finish and color so the repair doesn’t announce itself from the street.
Custom Welding
Some gate problems can’t be fixed by unbolting a part and swapping it. That’s what custom welding is for. We weld on site, in the driveway or at the commercial entrance, which keeps the gate in place and gets it back in service faster than shipping it off. Recent work includes reinforcing a rusted ornamental iron gate near Prairie Creek, fabricating a new operator mount for a campus slide gate off Renner Road, and repairing a sagged frame on a board-on-board cedar swing gate that had been out of square for years. Hal’s been welding since 2001, and he still welds it like his own gate is the one he has to look at every morning.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richardson
We’re certified to service nine major gate operator brands, and on any given week in Richardson we’re working on LiftMaster residential openers, FAAC and Elite commercial operators, and plenty of Mighty Mule setups on acreage and long-driveway properties. Because we stock common replacement parts for these brands and keep welding equipment on our trucks, most repairs happen in a single visit. You don’t wait on a part to ship, and you don’t hear a story about a “special order.” If the operator is clicking, grinding, or not responding to a remote or keypad, call us and we’ll figure out the brand, the model, and the fix.
Common Gate Parts & Welding Problems We See in Richardson Homes
- Clay-heaved hinge posts. Richardson sits on expansive Blackland Prairie clay that changes volume with every rain and every drought. Posts set shallow in the 70s and 80s get cycled up and down until the gate binds at the hinges and the latch won’t line up.
- Rotted post bases on ranch-style gates. The board-on-board cedar and pine gates put in when those single-story brick homes were built are now 30 to 50 years old. The above-ground post looks fine, but the buried base has been wicking moisture for decades and has turned to mulch.
- Rack and pinion wear on US-75 corridor slide gates. Commercial gates at tech and telecom campuses cycle hundreds of times daily, and that constant movement wears teeth, bends rails, and pushes rollers out of alignment. The gate still moves, but it’s loud, jerky, and heading toward a full stall.
- Rusted ornamental iron frames under HOA finish rules. Richardson’s newer master-planned sections and older custom subdivisions have iron gates with specific HOA color standards. We match finishes when we weld or replace sections, so the repair doesn’t trigger a compliance letter from the management office.
Pricing for Gate Parts & Welding in Richardson, TX
Here’s what work typically runs in Richardson, based on jobs we’ve done here recently. Hinge replacement on a cedar gate generally runs $145-$290 including hardware and re-alignment. A full post replacement, with the old post cut out, new post set in concrete, and the gate re-hung, typically runs $350-$600. Custom welding work starts around $150 for cracked frame and bracket repairs, while fabricating a new slide-gate operator mount for a commercial entrance usually lands between $400 and $800 depending on access and steel work. Gate roller replacement on automated slide gates runs $180-$380. Every quote is a fixed number, agreed before we start, and you’ll never see an “adjustment” at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from another company. Call (325) 936-1371 for a firm quote on your specific gate.
We Also Serve Cities Near Richardson
Our crews cover Richardson and the surrounding North Dallas suburbs every day. If you’re in Richardson we’re likely already nearby, and the same applies to Addison, Plano, Dallas, and Coppell. Same crew, same pricing, same 90-Day Done Right Promise. No call center, no “assigned region” guessing, just Hal and his crew covering the metro from one published shop.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Richardson
Because the hinge post is moving. Richardson’s clay soil swells when wet and shrinks hard during droughts, and a shallow-set cedar post gets worked like a loose tooth every year. New hinges on a post that’s out of plumb will sag again within months. The fix is usually re-setting or re-welding the post base, then re-hanging the gate. Call (325) 936-1371 and we’ll tell you which problem you actually have, for free.
Yes. We regularly weld and repair slide-gate operator mounts, rack and pinion assemblies, and guide roller brackets for commercial properties between Campbell Road and Renner Road. We work on LiftMaster, FAAC, Elite, and BFT commercial operators, and we match the existing steel work so the new mount doesn’t become a corrosion point. Call for an on-site assessment and a fixed written quote.
We cut the failed post at the base, dig out the old footing, set a new post with deeper concrete and proper drainage, and re-hang the square panel. If the base is sound but leaning, we can sometimes sleeve and re-weld the post in place to plumb. The gate gets checked for full swing and the latch gets aligned before we call it done. Free estimate, no trip charge inside the county.
We grind back the rust, cut out the compromised section, and weld in new material with a MIG process suited to thin-walled ornamental tubing. After that, we prime and paint to match the HOA’s approved finish so the gate doesn’t become a violation notice waiting to happen. If the rust has gone through into the frame rails, we’ll quote you the replacement section, not a patch that hides it for a season.
Yes. We replace worn rollers, straighten bent tracks, and re-align operators on commercial slide gates throughout the Renner Road corridor and the rest of Richardson. Constant card-access cycling wears rollers and teeth faster than most property managers expect, and a misaligned gate is quieter about its problems until it stalls. Call us and we’ll get it moving right, usually same day.
Contact Gatewood Fence & Gate in Richardson
If your gate is sagging, binding, or making a sound it didn’t make last month, call (325) 936-1371. You’ll get a live person, an honest assessment, and a written quote before any work begins. Hal’s been at this since 2001, and he doesn’t fix what doesn’t need fixing. That’s the oldest promise in the trade, and it’s the one we keep.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Richardson and the surrounding North Texas communities since 2001.