Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Dallas
Most gate failures in Dallas come down to two things: shifting clay soil and components that were never right for the job from day one. We repair hinges, posts, rails, and weld custom fixes on site, usually within one visit. If your gate drags, binds, or won’t close square, call (325) 936-1371 and talk to a live person who knows Dallas gate hardware. No phone tree, no call center, no eighteen-year-old reading a script. The name on the shop is Hal Gatewood, and the person on the phone knows what a weld bead should look like because he has run thousands of them since 2001.
Why Gatewood Fence & Gate Is Dallas’s Preferred Gate Parts & Welding Company
Dallas homeowners keep our number because we answer the phone at 2 a.m. the same way we answer at 2 p.m. A live person picks up, asks where you are, and gets you scheduled. We are locally owned and owner-operated, with a published address and license number anyone in Dallas can look up before we ever set foot on the property. Hal Gatewood’s name is on every invoice, and the 90-Day Done Right Promise is stamped in writing on every job. If it is not done right, one call brings him back. No fine print, no runaround.
The work we see across Dallas neighborhoods like Lake Highlands, Oak Cliff, and North Dallas is rarely just a snapped hinge. It is a hinge that snapped because the post beneath it has been heaving in Blackland clay for three seasons. Our Gate Parts & Welding crew diagnoses the whole assembly before touching a single bolt. Fix the visible break and leave the post out of plumb, and you’ll be calling every spring until the post fails the hinge weld entirely. We fix the cause, not just the symptom, because Hal has seen too many Dallas gates with seven years of someone else’s patch jobs stacked on them.
Our Gate Parts & Welding Services in Dallas
Hinge Replacement
Dallas hinge failures follow a pattern. The strap hinge on the top sags first, the gate starts dragging on the latch post, and someone cranks the barrel hinge tighter to compensate. That works for about six weeks. Then the gate leans far enough to shear the weld or tear the lag screws out of the post. We cut off the old hardware, square the gate to the post, and weld in new hinges rated for the full assembled weight of the panel, not just the gate leaf itself. In neighborhoods like Preston Hollow where custom iron gates run three hundred pounds or more, undersized builder hinges are the single most common point of failure we correct.
Post Replacement
Blackland Prairie clay swells after a North Texas downpour and shrinks during drought. Your hinge post moves with it. A post that was set dead plumb in 2019 can be leaning a half inch off vertical by 2026, and that half inch at the base becomes three inches of gate drag at the latch. When the post itself is cracked, rotted, or rusted through, we remove it and set a new one with a concrete footing deep enough to reach below the active clay zone. We weld a proper base plate and anchor bolts where the gate needs to support real weight. That is the difference between a gate that stays square for a decade and one that binds again in eighteen months.
Rail Repair
Top and bottom rails on wood gates take the worst of a Dallas summer. Daytime temperatures above 105°F bake moisture out of the rails, and the panels warp. A warped rail pulls the frame out of square and stresses the hinge fasteners. We cut out bent or rotted rail sections and weld new steel framework in place, or scarf in fresh wood rail stock where the gate is a wood build. The repair is structural, not cosmetic, which means the gate closes square and latches without having to lift it by the top corner.
Custom Welding
This is where we do the work most Dallas gate companies will not touch. We weld in your driveway or at the shop, depending on what the job needs. Cracked ornamental iron pickets, sheared hinge plates, broken latch housings, gate frames that have rusted through at the bottom rail, custom brackets for an operator arm, mounting plates for photo-eyes, steel repair sleeves for a sagging post without full replacement. Hal has welded all of it since 2001, and he gets genuinely annoyed when he sees a gate that somebody slapped a muffler-clamp repair on instead of doing the weld right. Bring us a written estimate from anyone else and we will give you a free second opinion.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
We service and stock parts for LiftMaster, FAAC, BFT, and Linear operators, along with hardware for five more major brands. If your Dallas gate runs on a builder-grade motor that came with the house, we can match the right rack and pinion or board without a two-week wait from a distributor. The goal is to get your gate working on the first visit. We carry common hinge sets, latch hardware, wheels, and motor parts in the truck, which means less downtime for Dallas homeowners who need their driveway closed and their dog in the yard tonight.
Common Gate Parts & Welding Problems We See in Dallas Homes
- Hinge posts heaved out of plumb by Blackland clay. The soil swells after rain and shrinks in drought, and the hinge post moves with it. When it tilts even half an inch, the gate binds against the latch post and the hinge welds tear under the torque.
- Heavy custom iron panels hung on builder-grade operators. A homeowner in a North Dallas gated community swaps the original wood gate for custom wrought iron, but never upgrades the operator. The motor strips its gears or burns out its control board within two to three seasons.
- Missing conduit runs on post-build automation. The builder never stubbed out power or low-voltage conduit, so adding automation means core drilling through new concrete or running surface-mounted PVC that cracks in the freeze-thaw cycle.
- Warped wood panels from consecutive 100-degree Dallas summers. Wood gate rails dry out, cup, and pull the frame out of square. We replace the rail and re-weld the frame so the gate hangs straight and latches without a shoulder shove.
Pricing for Gate Parts & Welding in Dallas, TX
Hinge replacement in Dallas typically runs $120 to $280, depending on the gate weight and how far the hinges have torn into the post. Post replacement is $350 to $800, driven by footing depth and whether we are welding a new base plate. Rail repair tends to fall between $150 and $400. Custom welding jobs, like a steel repair sleeve or a cracked frame, start around $90 and go up with the scope of the cut-and-weld work. Every quote is written, agreed, and signed off before any heat or metal is applied. No surprises at the door. Call (325) 936-1371 for a free estimate, and remember: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Dallas
We take calls throughout the Dallas area, including Irving, Duncanville, Addison, and Richardson. The clay soil and builder-grade gate problems do not stop at the Dallas city line, and neither do we. Wherever you are in the metro, a live person answers 24/7 and we put you on the schedule for the next available slot.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Dallas
The hinges are not the problem. Dallas sits on Blackland Prairie clay, which shrinks during dry spells and heaves after heavy rain. Your hinge post moves with that soil, and the gate binds because the post has tilted out of plumb, not because the hinge bolts loosened. We correct the post before repairing the hinge, or you will fight the same bind every warm season. Call (325) 936-1371 and we will look at the post first, not the hinge bolts.
Yes, but only if the operator is upgraded to match the weight of the new panel. A builder-grade motor sized for a light wood gate will strip its gears or burn out its board running a three-hundred-pound iron gate. We weld the correct bracket and rack and pinion installation, then set the operator limits for the actual gate weight. Get it quoted before the motor smokes.
In many Dallas cases, a steel repair sleeve welded over the base of a solid post and reset in fresh concrete is enough. We only dig out and replace the entire post when the steel has rusted through, cracked at the base, or the footing has failed beyond saving. Hal will tell you the truth either way, because he would rather weld a sleeve than charge you for a post job you did not need. Call (325) 936-1371 for a straight answer.
Yes, and we recommend it. We weld mounting brackets for photo-eyes and run the low-voltage wire through conduit, then tie the sensors into your operator. It is a straightforward addition on most Dallas gates, and it brings the gate up to current entrapment-protection expectations. We will quote it as part of the same visit so you are not paying a second trip charge.
The February 2021 freeze cracked operator housings across Dallas because trapped moisture froze and expanded inside the casing. Welding the housing is possible if the crack is clean and the casing is steel, but most builder-grade housings are pot metal or thin aluminum, which weld poorly. We will evaluate it honestly. If the housing is not weldable, we have replacements in the truck for most major brands, and we will not charge you for a weld that would fail in a year.
Need a straight answer on a gate that won’t close square, a post that has shifted, or a weld that needs to hold for the next decade? Call (325) 936-1371. A live person answers, 24/7, and the estimate is free. Hal Gatewood’s name is on the shop, the invoice, and the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dallas since 2001.