Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Oak Cliff, TX
A driveway gate that won’t open, or a pedestrian gate that drags across the walkway, usually means one of two things in Oak Cliff: the hinges have pulled loose from an old brick pillar, or the operator is fighting a gate that’s no longer plumb. Either way, you want it working today, not next week. Hal Gatewood and the crew at Gatewood Fence & Gate answer the phone around the clock, and we work on gates all over Oak Cliff most days of the week. Call (325) 936-1371 and you’ll get a person, not a menu.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Oak Cliff Homeowners Choose Gatewood Fence & Gate
Hal Gatewood started fixing gates in 2001, and his name is still on the shop. That matters in a place like Oak Cliff, where a lot of the work we see was done decades ago by somebody who isn’t around anymore. Homeowners in Winnetka Heights and Kessler Park call us because we’ll actually take the time to figure out what’s failing, not just swap the most expensive part and hope. The 90-Day Done Right Promise is stamped on every job in writing. If it’s not right, one call brings Hal back. No runaround, no arguing about what “done” means. We also publish our address and license number. You can drive to the shop and look us in the eye.
Background-checked, uniformed technicians show up for every job, and we service nine major gate brands including LiftMaster, FAAC, and BFT. The phone rings to a live person 24/7, so when a gate quits at 7:00 on a Sunday evening, you’re not leaving a message and wondering.
Gate Repair Services We Offer in Oak Cliff
Gate Repair
Most Oak Cliff gate repairs come down to worn hinges, sagging panels, or a latch that no longer catches. We fix the gate in your driveway, welding on site when the frame needs it, rather than hauling it off to a shop. Learn more about our Gate Repair in Oak Cliff.
Gate Installation
A new gate in an older Oak Cliff neighborhood has to respect the architecture. We measure, order, and install driveway and pedestrian gates that fit the house, and we’ll give you a written price before any work starts. Learn more about our Gate Installation in Oak Cliff.
Gate Motor & Opener
When an opener hums but the gate doesn’t move, the problem is often mechanical, not electrical. We diagnose the whole system, from the arm to the hinges, before recommending a repair. Learn more about our Gate Motor & Opener in Oak Cliff.
Gate Access Control
Keypads, intercoms, vehicle sensors, and safety edges all need to work together. We service and install access control for residential gates across Oak Cliff, and we’ll show you how the system is supposed to behave before we leave.
Gate Parts & Welding
Ornamental iron gates from the 1920s and 1930s often need a weld, not a replacement. Hal welds on site, in your driveway, so the gate never leaves the property. If the hinge post is the problem, that’s where we start, because a gate sags in the hinge post, not in the middle.
Neighborhoods We Serve in Oak Cliff
We work all over Oak Cliff, from the historic streets of Winnetka Heights to the hills of Kessler Park and down through Bishop Arts and Elmwood. Typical response time for non-emergency repairs in this area is same week, often sooner.
- Winnetka Heights
- Kessler Park
- Bishop Arts District
- Elmwood
- Stevens Park
Why Oak Cliff’s Climate & Housing Affect Gate Repair
Oak Cliff has some of the oldest housing in the Dallas metro, with a heavy concentration of 1910s through 1940s craftsman bungalows, Tudor revivals, and brick cottages. Many of those homes still have their original ornamental wrought iron gates, mounted to brick or limestone pillars that were built before anyone thought to run steel through the middle of them. In Winnetka Heights and Kessler Park especially, those pillars were laid as plain mortared brick. No rebar, no internal post. After 80 or 100 years of Dallas’s Blackland Prairie clay doing what it does, the mortar has crumbled, and the hinge lag bolts have nothing structural left to bite into.
The soil here shrinks hard in the long, dry summers and heaves when the rains return, so pillars shift, gates rack out of plumb, and latches stop lining up. A repair that ignores that cycle, by bolting new hardware to a deteriorated pillar, fails within a season. We see it all the time, and we usually start by re-coring or rebuilding the pillar cap before we touch the gate itself. Fix the panel without the post and you’ll fix it twice.
Pricing for Gate Repair in Oak Cliff
Service Area - Cities Near Oak Cliff
If you’re in a neighboring city, we can likely help. We also serve Highland Park, Dallas, Plano, and Irving. Call and we’ll tell you when we can be there.
Serving Oak Cliff, TX - Our Local Coverage Area
We’re based in the Oak Cliff area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Oak Cliff
How much does gate repair cost in Oak Cliff?
Gate repair in Oak Cliff typically costs between $180 and $450 for common fixes like hinge replacement or latch realignment. Work that involves rebuilding an old brick pillar or replacing a welded frame section runs higher, often $600 to $1,200, and we’ll quote that price before any work begins. Call (325) 936-1371 for an exact number on your gate.
Can you fix my gate the same day?
Yes, in most cases we can get to a non-working gate in Oak Cliff the same day or next day, especially if it’s a safety issue like a gate that won’t stay closed. The phone is answered by a live person 24/7, so tell us what’s happening and we’ll give you a straight answer on timing.
Why did my brick gate pillar crack in Oak Cliff?
The Blackland Prairie clay under Oak Cliff shrinks and swells through every dry summer and wet season, which slowly pushes old masonry pillars out of alignment. Many pillars in historic districts like Winnetka Heights and Kessler Park were built without internal steel, so the mortar eventually gives out and the pillar cracks. The fix usually means re-coring the pillar before re-hanging the gate.
Do you work on original wrought iron gates in old Oak Cliff homes?
We do, and that’s a big part of our work in this neighborhood. Original ornamental gates from the 1920s through 1940s are usually worth repairing rather than replacing, and we weld them on site in your driveway. Our home page has more on our repair-first approach.
Do you provide free estimates for gate repair in Oak Cliff?
Yes. Estimates are free, and we’ll give you a written price before any work starts. We also offer a free second opinion on any written estimate you’ve received from another company, because we’d rather earn the job than haggle for it. Call (325) 936-1371 to set something up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oak Cliff and the Dallas-Fort Worth metro.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Oak Cliff Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond