Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Highland Park, TX
A gate that won’t open in Highland Park isn’t just an inconvenience. It’s a multi-million-dollar home sitting exposed to Preston Road traffic, a parked car trapped behind a wall of ornamental iron, and a security perimeter that just stopped being a perimeter. Gate repair in Highland Park runs about $180 to $340 for most common fixes, and we can usually have someone at your home the same day you call. Hal Gatewood has been fixing gates since 2001, and he answers the phone himself at (325) 936-1371.
We know the gates in this town, from the 1940s wrought-iron swing gates on Beverly Drive to the modern automated slide systems tucked behind the new construction on Armstrong Parkway. Highland Park’s housing stock wasn’t built for generic repair work. The estates here demand a level of craftsmanship that matches the original ironwork, and most gate companies simply don’t have a welder on the truck. We do.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Highland Park Homeowners Choose Gatewood Fence & Gate
Most of our Highland Park work comes from exactly one source: a neighbor telling another neighbor to call Hal. The homes around Lakeside Drive and the streets off Preston Road have gates that are 40 to 80 years old, and the homeowners have usually been through the wringer with a national outfit that quoted one price over the phone and arrived with a different invoice. Hal Gatewood’s name is on the shop, the address is published, and the license number is there for anyone to look up. That’s the kind of accountability people in this town actually want.
Every Highland Park job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no service ticket in a queue somewhere. We serve the neighborhoods around Highland Park Village, the estate lots near Lakeside Park, and the streets surrounding the Dallas Country Club regularly. Our crew shows up background-checked and uniformed, drives into your driveway, and fixes the gate right there rather than hauling it to some shop across town.
We’re certified to service nine major gate brands, including LiftMaster, FAAC, and BFT. That matters in Highland Park because the operator on your gate is likely a high-end model, not a big-box opener.
Gate Repair Services We Offer in Highland Park
Gate Repair
A sagging gate in Highland Park usually isn’t a gate problem; it’s a post problem. The Blackland Prairie clay under this town shifts with every wet spring and dry summer, which means the hinge post migrates a fraction of an inch, and suddenly your 400-pound iron gate drags on the driveway. We weld, straighten, re-hang, and re-align on site, and we match the original iron profile so the repair doesn’t announce itself.
Learn more about our gate repair in Highland Park.
Gate Installation
New construction behind a teardown on Drexel Drive or a fresh custom gate for a Tudor on Miramar Avenue needs a crew that measures, fabricates, and installs without leaving a mess. We build to the size and style of the opening, run the power correctly the first time, and hand you a written price before any work starts. You’ll never get a substituted material. You’ll get the solid round bar or flat stock specified in the quote.
Learn more about our gate installation in Highland Park.
Gate Motor & Opener
Highland Park’s original estate gates often predate the operators now attached to them, which means the motor and the gate weren’t designed for each other. We handle recalibration, limit-switch adjustment, travel-limit repair, and full operator replacement when the board finally gives out, including Linear and FAAC units that national chains don’t stock parts for.
Learn more about our gate motor and opener service in Highland Park.
Gate Access Control
Your keypad, intercom, or camera access setup needs to talk to the operator without dropping the signal every time the temperature swings 40 degrees. That’s a Highland Park problem, not a hypothetical. We integrate keypads, telephone entry, and camera-based systems with the operator so the gate actually opens when the code is entered, and we test it across weather conditions before we leave.
Learn more about our access control work in Highland Park.
Gate Parts & Welding
We keep the common parts on the truck: hinges, collars, wheels, track, sensors, capacitors. But the defining skill we bring to Highland Park is on-site welding. A stress-cracked collar joint on a 1950s ornamental iron gate gets welded in your driveway, not shipped to a fabrication shop for a week. Fix the panel without the post and you’ll fix it twice. We fix both the first time.
Learn more about our parts and welding service in Highland Park.
Neighborhoods We Serve in Highland Park
We work across the whole Town of Highland Park, from the estates along Lakeside Drive to the streets off Preston Road and Armstrong Parkway. Our typical response time here is same-day or next morning for most repair calls. If you’re near Highland Park Village or over by the Dallas Country Club, call us and you’ll talk to a person, not a voicemail tree.
- Lakeside Drive and Lakeside Park area
- Highland Park Village area
- Armstrong Parkway corridor
- Streets surrounding Dallas Country Club
- Preston Road and Beverly Drive estates
Why Highland Park’s Climate & Housing Affect Gate Repair
Highland Park sits directly on the Blackland Prairie’s expansive clay soil. The ground here swells with spring rain, then bakes and cracks under Dallas’s sustained triple-digit summer heat. That cycle doesn’t just move your fence line; it moves your gate post footings. A swing gate that opened cleanly in March will scrape the driveway by August because the post has rotated a quarter-inch. We re-align travel limits and shim or re-set the post footings seasonally, which is partly why we do so much repeat work in Highland Park.
The other local factor is the gates themselves. Highland Park’s housing stock runs heavy on original ornamental wrought-iron entry gates from the 1920s through the 1960s. Those gates were hand-forged with solid round and flat bar stock, and their collar joints weren’t designed to carry the torque of a modern automated operator. Add the occasional North Texas ice storm, like the February 2021 freeze, and you get cracked welds and fried circuit boards on the same gate. That’s a two-part repair job, and it’s one we do regularly along Beverly Drive and the surrounding streets.
The Town of Highland Park runs its own building department, independent of Dallas. The town and its homeowners are strict about aesthetics, and rightly so. A technician who suggests swapping your 1940s solid round bar gate for modern square tubular steel will get run off the property. We match period-correct profiles and finishes, and we weld in the driveway so the original fabric remains intact. It’s the right way to work in this town, and it’s the only way we do it.
Pricing for Gate Repair in Highland Park
You should know what a Highland Park gate repair costs before you pick up the phone. Here’s where we land on the most common jobs:
- Basic repair (hinge tightening, limit switch adjustment, sensor alignment): $125 - $225
- On-site welding repair (cracked collar, broken picket, sagging section): $185 - $340
- Operator or motor replacement (including programming and testing): $450 - $1,400 depending on brand and horsepower
- Access control integration (keypad, intercom, or camera-based): $250 - $900
Every quote is written, discussed, and agreed before we turn a single wrench. The price on the page is the price on the invoice. No trip charge inside the county, no surprises at the door. We also offer $40 off any repair over $200 and a permanent 10% discount for seniors and veterans, no haggling required.
Service Area - Cities Near Highland Park
Our work in Highland Park often brings us to neighboring cities with similar soil and weather conditions. We serve gate repair in Dallas, gate repair in Plano, gate repair in Irving, and gate repair in Richardson. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Highland Park locally.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Highland Park
Most gate repairs in Highland Park fall between $180 and $340 for common fixes like hinge tightening, limit adjustment, and on-site welding. Operator replacement runs higher, from $450 to $1,400 depending on the brand and horsepower. Call (325) 936-1371 for an exact quote; estimates are free, and the price is locked before we start.
We answer calls 24/7 with a live person, and for most repair jobs in Highland Park we can get someone to your home the same day or early the next morning. Call (325) 936-1371 and tell us what the gate is doing, and we’ll give you a straight answer on timing.
Our gate installation in Highland Park includes measuring the opening, fabricating or sourcing the gate to match the original iron profile, setting or re-setting the post footings correctly for the clay soil, running the power, mounting the operator, and programming the access control. You get one written price for the whole job, and the 90-Day Done Right Promise applies in writing.
Yes. We run the electrical, install the photo eyes and safety edges, and test the entire system under load before we finish. A gate operator that reverses correctly and stops on obstruction is a requirement, not an upgrade. If the board fails or the safety edge misreads, it’s covered under the same 90-Day Done Right Promise.
Yes. We weld on site and match the original profiles: solid round bar, flat bar stock, period-correct collar joints. We don’t substitute modern square tubular steel unless you specifically ask for it, and we’ll tell you if we think it’ll compromise the look of the gate. The repair should disappear into the original fabric, not announce itself.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park and surrounding communities since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Park Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond