Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Dallas, TX
Dallas sits on the Blackland Prairie, a band of clay soil that swells after every hard rain and shrinks during the long dry spells. That movement never stops, and it’s the quiet reason so many gates across this city lean, drag, or stop latching within a few years of installation. We’ve been called out to realign posts that shifted two inches in a single wet spring. If your gate is scraping the ground or the latch no longer lines up, we’ll come take a look. Call (325) 936-1371 and a live person answers, any hour.
We serve the whole Dallas metro with gate repair, installation, motor and opener work, access control, and on-site welding. The truck is stocked, the schedule is honest, and the person who answers the phone is someone who can actually make the call on whether you need a repair or a replacement. Hal Gatewood runs this shop himself, and the 90-Day Done Right Promise goes in writing on every invoice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Dallas Homeowners Choose Gatewood Fence & Gate
Most of our Dallas calls start the same way: someone watched a gate get worse through one whole season, then finally decided it had to be dealt with. By the time we arrive, they’ve usually been told by another company that the whole thing needs to be replaced. More than half the time, it doesn’t. Hal welds on site, straightens posts where the soil has moved them, replaces only the parts that failed, and leaves the rest alone. That repair-first approach has built our name in neighborhoods like Lake Highlands and North Dallas, where people tend to keep their homes for decades and appreciate a vendor who treats a gate like something worth fixing rather than discarding.
We carry a state license you can look up, we’re insured and bonded, and our technicians are background-checked and wear uniforms. The shop has a published address, and Hal’s name is on it. In Oak Cliff we’ve rebuilt wood privacy gates that hadn’t closed properly since the 2021 freeze. In Preston Hollow we’ve replaced operators on heavy iron driveway gates that a builder-grade motor couldn’t handle. Same crew, same warranty, same phone number every time.
Gate Repair Services We Offer in Dallas
Gate Repair
A sagging gate is almost always a hinge-post problem, not a panel problem. Fix the panel without the post and you’ll fix it twice. We straighten, brace, and rebuild the post, weld cracked frames on site, and replace hinges, rollers, and latches with hardware sized for the actual weight of the gate. Learn more about our Gate Repair in Dallas.
Gate Installation
New gate work in Dallas means sizing the post footings for clay soil, not just digging a hole and pouring concrete. We set posts deeper than code minimums where the soil is known to move, then build or hang the gate to the panel weight it’ll actually carry. Learn more about our Gate Installation in Dallas.
Gate Motor & Opener
Dallas summers push gate operators past their limits. Lubricants thin out at 105°F, capacitors fail, and control boards overheat. We service LiftMaster, BFT, Linear, and Viking openers, and we tell you plainly when a motor is undersized for the gate someone hung on it. Learn more about our Gate Motor & Opener in Dallas.
Gate Access Control
Gated townhome communities in Uptown and East Dallas call us for keypad failures, stuck maglocks, and telephone-entry systems that stopped ringing units. We troubleshoot the low-voltage wiring first, and we don’t sell you a new panel because the old one had a loose connection.
Gate Parts & Welding
We stock common hinges, rollers, latch hardware, and opener components, and if a steel frame is cracked, we weld it right in your driveway. No hauling the gate to a shop, no week-long wait. The fix is done where the gate lives.
Neighborhoods We Serve in Dallas
We’re out in Dallas every week, covering the residential streets from Uptown to the north side. Typical response for a repair call in the city is same-day or next-morning, and you’ll hear a live voice the first time you call.
- Lake Highlands
- Oak Cliff
- Preston Hollow
- North Dallas
- Uptown
Why Dallas’s Climate & Housing Affect Gate Repair
The clay under Dallas doesn’t just sit there. It’s the Blackland Prairie soil, and it breathes. After heavy spring rain it swells enough to lift a gate post a full inch or more, tilting the post out of plumb and throwing the latch geometry out of line. Then summer hits, the ground dries, and the post settles back at a slightly different angle. Repeat that cycle for three or four years and you have a gate that drags in July and won’t latch in March. Post realignment and concrete collar reinforcement are the most common repairs we do in this city, and they’re far more frequent here than they’d be in a town built on sand or rock.
The housing stock adds another layer. Ranch homes from the 1950s through the 1970s in Lake Highlands and Oak Cliff often have original wood gates on shallow footings, and those posts move the most. North Dallas brick homes from the 1980s and 1990s tend to have steel tube gates with concrete work that’s cracked at the base. Preston Hollow and Bluffview have a high concentration of custom iron driveway gates, heavy enough that the post and operator both need to be matched to the panel. Then there’s the February 2021 freeze: operator housings cracked, hinges seized, and low-voltage wiring hardened and split, and we still see scars from that week when the temperature swung from 70°F to near zero in a day.
Pricing for Gate Repair in Dallas
- Post realignment and concrete reinforcement: $275-$650, depending on post size and access
- Hinge or roller replacement: $120-$320 per gate
- Latch or lock replacement: $95-$250
- Weld repair on a cracked steel frame: $180-$450, done on site
- Operator troubleshooting and minor repair: $150-$400
- Full operator replacement: $850-$2,600, parts and labor
Every quote is written and agreed to before work begins. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Those aren’t promo codes you have to ask for; we apply them automatically.
Service Area - Cities Near Dallas
We work throughout the metro, and many of our calls come from just outside the city line. If you’re in Irving, Duncanville, Addison, or Richardson, we’ll come out and have a look, same as any Dallas address. The phone number is the same: (325) 936-1371.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and offer Gate Access Control - Dallas and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dallas
How much does gate repair cost in Dallas?
Most repairs fall between $120 and $650, with full operator replacements running $850 to $2,600 depending on the motor and panel weight. Soil-related post realignment is the most common job in Dallas and typically lands between $275 and $650. Call (325) 936-1371 and we’ll quote it over the phone so you know before we arrive.
Can you fix a gate post that’s leaning from Dallas’s clay soil?
Yes. That’s the single most common repair we do in Dallas. We dig around the post, set it back to plumb, and pour a reinforced concrete collar that resists the swell-shrink cycle better than the original footing. The fix usually takes half a day.
Do you repair gate openers damaged in the 2021 freeze?
We’ve repaired and replaced dozens of openers that cracked, seized, or shorted during that freeze, and many of them failed months or even years later when the weakened parts finally gave out. If your operator has been intermittent since then, call us, and we’ll check the board, the capacitor, and the wiring insulation before recommending any replacement.
Can you service my LiftMaster or BFT gate operator in Dallas?
Yes. We carry parts and have field experience with LiftMaster, BFT, Linear, Viking, Ghost Controls, and other major brands. We’ll tell you if the motor is undersized for a gate that was upgraded to something heavier, which is a common problem in North Dallas gated communities along Preston Road.
Is there a warranty on Dallas gate repairs?
Every repair, installation, and opener job carries Gatewood Fence & Gate’s 90-Day Done Right Promise. If it’s not done right, one call brings Hal back, no runaround. The promise is written on every invoice, not buried in fine print.
If your gate is dragging, your opener is stalling, or you need Dallas Gate Parts & Welding, call (325) 936-1371. A live person answers around the clock, estimates are free, and the price is agreed before the work starts. You don’t have to take a day off work wondering when we’ll show up. We’ll be there when we said we would.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dallas with Ghost Controls service in Dallas and on-site welding and gate repair since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth