Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLock Repair in Highland Park, TX
If your gate lock is jamming, refusing to latch, or simply won’t turn, you need a fix that lasts rather than a temporary adjustment that slips the moment the temperature drops. At Gatewood Fence & Gate, we handle gate repair and lock repair across Highland Park, TX, focusing on mechanical reliability and security rather than just swapping out parts. A gate lock is the first line of defense for your property, and when it fails, it is not just an annoyance; it is a security risk. Whether you are dealing with a standard manual latch that has rusted shut or an electronic strike plate that has lost its signal, we can help. Call us at (325) 936-1371 to discuss the specific issue you are having, and we can get someone out to take a look.
We believe in fixing the problem at the source. Many companies in the area will push for a total replacement of your gate operator or latch system when a simple, targeted repair would suffice. We take the opposite approach. If the lock mechanism is salvageable, we repair it. If it needs a new component, we use quality parts compatible with your specific setup. We have been owner-operated since 2001, and we bring that same philosophy to every job in Highland Park. If you need a more extensive fix, you can always visit our home page or check out our broader Gate Repair in Highland Park services to see everything else we handle.
When You Need Lock Repair
You usually know when a lock is failing before it stops working entirely. In Highland Park, we see specific patterns of failure caused by our local soil conditions and the way gates settle over time. If you notice any of these signs, it is time to have a professional look at it before you find yourself locked out or unable to secure your property:
- The Latch Misses the Strike Plate: This often happens because the gate post has shifted slightly. If the latch hits the plate instead of sliding in, the repeated impact will eventually shear the bolt or break the latch mechanism itself.
- Key Resistance or Sticking: If you have to jiggle the key or force it to turn, the internal pins are likely worn or dirty. In our climate, moisture and dust can build up inside the cylinder, causing the lock to seize up.
- Electronic Strike Failure: If you use an electronic system like Viking or BFT and hear a hum but the gate won’t open, the solenoid inside the strike plate may be burnt out. This is a common electrical failure that requires specific testing, not just a battery swap.
- Physical Damage or Rust: Over time, the protective coating on steel or iron locks wears away. Once the metal is exposed, Highland Park humidity leads to rapid oxidation, causing the internal springs to snap or the bolt to rust in a fixed position.
- Gate Sagging: A sagging gate puts immense pressure on the lock assembly. If you have to lift or push the gate to get it to latch, you aren’t just wearing out the lock; you are putting strain on your gate hinges and the frame itself.
Our Lock Repair Process
When you call us, you are getting a process that has been refined over 29 years. We don’t use guesswork. We show up, assess the mechanical failure, and provide a clear path forward.
- Assessment of the Gate Alignment: Before we touch the lock, we check the gate. If the gate is sagging, a new lock will just fail again in a few months. We verify the hinge integrity first.
- Disassembly and Inspection: We take the lock assembly apart to see what is actually broken. Often, it is a single spring or a bent rod rather than a total system failure.
- On-Site Welding or Adjustment: If the strike plate needs to be moved or reinforced, we do it right there in your driveway. We don’t take your gate away; we fix it where it stands.
- Mechanism Cleaning and Lubrication: We clear out debris and use weather-appropriate lubricants that won’t attract dust or gum up in the heat, ensuring the action is smooth.
- Testing Under Load: We test the lock with the gate under normal operation, ensuring it latches securely every time without requiring force from the user.
We stand behind this work with our 90-Day Done Right Promise. If the repair does not hold up, you call us, and we make it right. It is that simple. We have been serving Highland Park since 2001, and we intend to keep doing so, which means we cannot afford to do sloppy work.
Lock Repair Pricing in Highland Park
We believe in upfront, honest pricing. We do not have hidden trip charges if you are in the county, and we always offer a free second opinion on any written estimate you have already received. While the exact cost depends on whether you have a simple mechanical latch or a complex electronic access system, most repairs fall within these ranges:
| Service Type | Typical Cost Range |
|---|---|
| Manual Latch Adjustment/Alignment | $95 – $185 |
| Internal Lock Component Replacement | $150 – $275 |
| Electronic Strike Plate Repair | $200 – $350 |
| Full Lockset Replacement | $250 – $450+ |
If your repair total comes to over $200, we automatically apply a $40 discount. We also offer a permanent 10% discount for all seniors and veterans. Because we are owner-operated, we don’t have the overhead of a large national chain, and we pass those savings on to you. Call (325) 936-1371 for an exact quote on your specific gate-estimates are free, and we are happy to talk through what you are seeing.
FAQs - Lock Repair
How much does it cost to fix a gate lock in Highland Park?
Most basic lock repairs in Highland Park range from $95 to $275, depending on whether the issue is a simple alignment problem or a broken internal component. Electric gate repair for locks like those from Linear or Ghost Controls can cost a bit more due to the specialized parts involved, but we always provide an upfront price before we start any work. Call (325) 936-1371 for a free estimate.
Can you fix my gate lock today?
We prioritize calls that involve security risks, such as a gate that will not close or lock at all. While we cannot guarantee same-day service for every single call, we do our best to get to Highland Park residents quickly. Because a live person answers our phone 24/7, you will never be left wondering if your message was received.
Is it cheaper to repair or replace the lock?
In most cases, it is significantly cheaper to repair the existing lock, especially if you have a high-quality unit. Many companies will try to upsell you on a new unit because it is easier for them, but we specialize in on-site repair. We will only recommend a replacement if the lock is beyond saving or if the cost of parts exceeds the value of a new, reliable unit.
Do you work on all gate brands?
We are certified to service nine major brands for automatic gate repair, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate uses one of these systems, we have the experience and the parts to get it running again. If you have a different brand, call us-we have been at this since 2001 and have likely worked on something very similar.
When you need someone who knows the area and knows gates, you need a local expert. We are not a call center, and we are not a national franchise passing through town. We are the neighbor who shows up when promised, fixes the problem, and stands by the work. If your gate lock is acting up, give us a call at (325) 936-1371. We will get it sorted out.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park.