Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Duncanville
Gate parts and welding in Duncanville usually means one of two things: a hinge post that has heaved out of plumb in the black gumbo clay, or a cracked rail on an aging swing gate that somebody wants to patch instead of replace. We do both, and we do them on site. Hal Gatewood has been welding and resetting gates since 2001, and our crew knows the neighborhoods off Camp Wisdom Road and Danieldale Road well enough to quote the job before we even pull the truck up. If your gate drags, binds, or won’t latch, call (325) 936-1371 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Duncanville’s Preferred Gate Parts & Welding Company
Duncanville is a fully built-out city. The ranch homes from the 1960s through the 1980s still have their original gate hardware in a lot of cases, and time plus clay heave has done a number on it. Homeowners here don’t need a sales pitch. They need somebody who will show up, look at the post, and tell them the truth about whether it gets reset or replaced. That is what we do. Our Gate Parts & Welding team has reset hundreds of posts in Duncanville, and the work carries the 90-Day Done Right Promise in writing. If it is not done right, Hal comes back and makes it right. No runaround.
We answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail tree, not a call center. When you call about a gate dragging on the concrete off Wheatland Road, the person who picks up knows what you’re describing. That matters when your gate won’t close and you need it secured tonight.
Every job starts with upfront pricing. You get the number before any work begins, and it does not change at the door. That is a promise, not a footnote. We also offer $40 off any repair over $200, no trip charge inside Dallas County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in Duncanville
Hinge Replacement
In Duncanville, hinge failure is rarely just a hinge failure. The expansive clay under the city swells after spring rains and shrinks during the 100-degree summer droughts, which spreads gate posts apart season after season. That puts lateral stress on hinge bolts until they shear. We replace the hinge and correct the post alignment so the new hardware isn’t fighting the same force that killed the old one. A hinge replacement on a standard single swing gate in Duncanville typically runs $220 to $380, including the hardware and on-site welding if the bracket needs reinforcement.
Post Replacement
Some posts can be reset. Some need to come out entirely. When a post is rotted at the base or cracked through from years of clay heave, we dig a deeper footing, set the new post, and weld any brackets the gate needs. We do this work in tight spaces all the time, shared driveways and side yards where room to work is measured in inches. A post replacement in Duncanville typically runs $340 to $620 per post, depending on depth, concrete removal, and whether the gate has to be lifted off its hinges to do the job right.
Rail Repair
Cracked gate rails are the signature problem on narrow shared driveways in Duncanville’s older neighborhoods. When a swing gate gets forced open too far or a slide gate’s post footing shifts, the rail takes the stress and eventually splits. We weld the crack on site, then reinforce the joint so it doesn’t fail again at the same spot. Rail repair welding typically runs $140 to $280 per rail, and we can usually do it without hauling the gate off the property.
Custom Welding
Not every gate problem has a bolt-on fix. Some need a bracket fabricated, a hinge reinforced, or a section of steel spliced in. Our crew welds on site in Duncanville driveways, which means your gate stays put and your vehicle access stays open. Custom welding work typically runs $95 to $175 per hour plus materials, and we give you the full price in writing before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Duncanville
We service and stock parts for the major gate opener and hardware brands Duncanville homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a BFT operator on a slide gate off Camp Wisdom Road strips its drive gear because the post footing shifted, we keep those parts in the truck. When a Viking opener binds on a solar-powered gate after a heavy rain, we know what to look for before we even open the panel. Our trucks carry the common parts Duncanville jobs need, which means fewer trips and a faster fix.
Common Gate Parts & Welding Problems We See in Duncanville Homes
- Hinge post heave on wide side-yard swing gates. The 10 to 12 foot double swing gates common off Danieldale Road were built wide for boat trailers and RV access. Black gumbo clay spreads the posts apart over the years, and the hinges shear under the load. We reset the post and weld a reinforced bracket so the sag correction holds.
- Cracked rails on shared driveway gates. Restricted working space means a lot of Duncanville gates get partial disassembly and welded repairs instead of full replacement. The rails take repeated stress and eventually crack. We weld them in place and reinforce the joint.
- Slide gate binding after heavy rains. When expansive clay shifts a slide gate’s post footing, the rack and pinion alignment goes out. The gate binds, the operator strains, and the drive gear strips. We correct the footing and realign the rack before the motor burns itself out.
- Rusted hinge bolts on 40 to 50 year old iron gates. Duncanville’s original ornamental iron driveway gates are hitting the end of their useful life at the same time. Hinge bolts corrode, snap, or wallow out their holes. We replace the hardware and weld in new mounting plates where the old metal has thinned.
Pricing for Gate Parts & Welding in Duncanville, TX
Here is what Gate Parts & Welding work actually costs in Duncanville, based on the jobs we do most often:
- Hinge replacement: $220 to $380 per gate, including hardware and bracket welding if needed
- Post replacement: $340 to $620 per post, depending on footing depth and concrete removal
- Rail repair welding: $140 to $280 per rail, on site, without removing the gate
- Custom welding: $95 to $175 per hour plus materials, quoted in writing before work begins
- Full gate reset with new hinges and post correction: $480 to $780, common on wide double swing gates
The price you get is the price you pay. We quote it upfront, in writing, before any work starts. No trip charge inside Dallas County, and $40 off any repair over $200. Call (325) 936-1371 for a free estimate.
We Also Serve Cities Near Duncanville
Our Gate Parts & Welding in Duncanville crew also covers Irving, Dallas, Addison, and Coppell. If your gate is failing in one of those cities, same crew, same upfront pricing, same 90-Day Done Right Promise.
Serving Duncanville, TX - Our Local Coverage Area
We’re based in the Duncanville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Duncanville
Because the hinges were never the real problem. The Blackland Prairie clay under Duncanville expands and contracts with every wet/dry cycle, spreading your gate posts apart a little more each year. New hinge bolts shear under that lateral load. We correct the post alignment and weld a reinforced bracket before installing new hinges, so the repair addresses the cause, not just the symptom. Call (325) 936-1371 for an exact quote, estimates are free.
Yes, in most cases we weld the rail in place, right in the driveway. Shared driveways in Duncanville’s older neighborhoods often leave no room to remove a gate panel without blocking both homes’ vehicle access. We work around that. Rail repair welding typically runs $140 to $280 per rail and the gate stays put the whole time. Call (325) 936-1371 and we’ll come take a look.
Almost certainly. When Duncanville’s expansive clay swells after spring rains, it shifts the slide gate’s post footing. The rack and pinion alignment goes out, the gate binds, and the opener strains until the drive gear strips. We correct the footing and realign the rack. The typical repair runs $180 to $420 depending on how far the footing moved. Call (325) 936-1371 for a free estimate before the motor burns out entirely.
It depends on how far it has moved and what is holding it. A post leaned less than about two inches out of plumb can often be jacked, re-plumbed, and reinforced with a welded steel bracket and new footing. A post that is rotted at the base or cracked through needs to come out. We will tell you which one you have and quote the job accordingly. Post replacement in Duncanville typically runs $340 to $620 per post. Call (325) 936-1371 and we’ll give you an honest answer.
Yes. Most sagging double swing gates in Duncanville are fixed on site without removing either panel. We support the gate, correct the hinge post alignment, replace the hinges, and weld reinforcement where the frame has fatigued. On a shared driveway off Danieldale Road, our crew recently rebuilt a 12 ft double swing gate whose hinge post had leaned three inches out of plumb from black gumbo heave. We dug a new footing, reset the post, and welded a reinforced hinge bracket, and both neighbors’ vehicle access stayed open the whole day. That job ran $560. Call (325) 936-1371 for your exact number.
If your gate is dragging, sagging, or won’t latch in Duncanville, call (325) 936-1371 now. A live person answers 24/7, the estimate is free, and the price you get quoted is the price you pay.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Duncanville since 2001.