Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Coppell
Gate repair in Coppell isn’t a one-size-fits-all job, and if you’ve lived here long you already know why. The black clay soil, the HOA architectural rules, and 25-year-old gate operators wearing out at the same time all stack up. Gatewood Fence & Gate has been welding, realigning, and rebuilding gates since 2001, and we answer the phone around the clock. If your gate is sagging, grinding, or refusing to open, call Hal at (325) 936-1371. He’ll tell you straight what it needs and what it costs before any work starts.
Why Gatewood Fence & Gate Is Coppell’s Preferred Gate Repair Company
Coppell homeowners don’t need another outfit that sends a different face every season. Hal Gatewood’s name is on the shop, his address is published, and his license number is public. That’s the accountability a lot of folks in Coppell tell us they’re looking for, especially after a big national company burned them on a quote.
We’re locally owned and owner-operated, which means the person who answers your call knows Coppell’s neighborhoods, its HOAs, and its gate failures. We work on gates along Denton Tap Road, over in the Northlake Woodlands subdivision, and throughout the Coppell ISD area. And if we quote you a price on the phone, that’s the price on the invoice. No trip charge inside the county either.
Every job we do, from a hinge post reset to a full automatic operator replacement, carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround.
Our Gate Repair Services in Coppell
We don’t haul gates off to some shop across the metroplex. We fix them in your driveway, on your shared driveway, in your alley, wherever they live. Here’s what Coppell homeowners call us for most.
Electric Gate Repair
Most electric gates in Coppell were installed when the subdivisions were built in the 1990s and early 2000s. Those operators are now 20 to 30 years old, and they’re failing in clusters. We service LiftMaster, FAAC, BFT, and Linear, among others. If your gate opens halfway and stops, or hums but doesn’t move, the problem is usually the operator, the control board, or a safety photocell out of alignment.
Automatic Gate Repair
Automatic gates are the biggest one we see in Coppell’s HOA-heavy neighborhoods. When the open/close cycle gets flaky, we trace it before we swap anything. That matters because Coppell HOAs often require exact-match parts. We document the existing hardware first, then quote. That saves you from an architectural review board rejection and a re-do at your expense.
Hinge & Post Repair
Coppell’s expansive black clay soil is the culprit behind most sagging gates here. Wet winters swell the soil, dry summers shrink it, and the hinge posts rack out of plumb season after season. That strips hinge threads and binds the latch strike. We cut out and reset the post in concrete with deeper footings, then realign the gate so it swings true. Tightening the hinges alone won’t fix a moving post. The gate sags in the hinge post, not in the middle.
Gate Realignment
A gate that drags on the ground or won’t latch isn’t just annoying. It’s wearing out its own hardware every time you force it. We realign swing and slide gates across Coppell, from the wide shared driveways in Northlake Woodlands to the tighter side-yard gates along MacArthur Boulevard. On-site welding lets us build up worn hinge barrels and striker plates instead of replacing them, which is usually faster and cheaper.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coppell
We’re certified to work on nine major gate brands, and in Coppell we see a lot of DoorKing, LiftMaster, FAAC, and BFT from the original 1990s installs. Because we stock common parts locally and order exact-match replacements from our DFW suppliers, turnaround is fast. If your operator is a Ghost Controls or Mighty Mule on a newer gate, we handle those too. The repair-first approach means we rebuild what’s rebuildable and replace only what’s actually failed.
Common Gate Repair Problems We See in Coppell Homes
- Hinge post lean from clay soil. Winters here heave the black clay, and by spring your gate binds on the latch strike. We reset the post deeper and pack it properly so it stops moving with the seasons.
- HOA mismatch rejections. If the replacement hinge post cap or picket profile doesn’t match the original subdivision spec, the architectural review board can reject the work. We photograph and document everything before we quote so the parts match the first time.
- Shared driveway slide gate failures. A single loop detector on a shared driveway often fails to open for the second car arriving while the first is parked over the loop. We install dual-loop and shadow-loop setups that actually work for Coppell’s shared driveways.
- February 2021 freeze damage. That deep freeze cracked operator housings, split cedar boards, and killed a lot of control boards across Coppell. We’re still seeing the delayed failures in gates that limped through the next two seasons.
Pricing for Gate Repair in Coppell, TX
Here’s what we charge in Coppell right now, straight up. A hinge and post repair on a swing gate typically runs $275 to $475, depending on whether the post needs to be dug out and reset. Gate realignment runs $150 to $325, less if we’re already on site for a related repair. Electric gate repair starts around $225 for diagnostics and minor board or sensor work, with full operator replacements running $750 to $1,900 depending on brand and horsepower. Automatic gate repairs that combine operator service with new safety edges range from $475 to $1,600.
The price we quote before starting is the price you pay. No trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate from another company. Seniors and veterans get 10% off permanently. It’s that simple.
We Also Serve Cities Near Coppell
Our service area covers Coppell and the surrounding metroplex. We handle gate repair calls in Gate Repair in Coppell, plus Addison, Richardson, Plano, and Dallas. If you’re just outside Coppell, call and ask. If we can get to you inside the county, we will. Our Gate Repair team covers the whole DFW side of the metro.
Serving Coppell, TX - Our Local Coverage Area
We’re based in the Coppell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Coppell
In most Coppell subdivisions, the HOA architectural review committee requires that any replacement hardware, finish, or picket profile match the original 1990s or early 2000s specification. We photograph the existing gate’s finish, hinge style, and operator model before quoting so you can submit exact-match documentation. That prevents a weeks-long board review delay or a forced re-do. Submit our documentation with your ACC request and you’ll usually get approval faster. Call (325) 936-1371 and we’ll walk you through what your specific HOA needs.
The expansive black clay soil under Coppell heaves during wet winters, which racks hinge posts out of plumb on a seasonal cycle. Tightening hinges on a post that’s moving doesn’t fix anything. We dig out the post, set it deeper in concrete below the active soil zone, and realign the gate so it stops binding. If you wait, the stripped hinge threads will eventually make a simple post reset into a post and hinge replacement. Call us early and it’s a smaller bill.
Yes. On shared driveways, we stage the work so the pedestrian gate stays operational for neighbors and dog walkers throughout the job. Last week our crew serviced an automatic slide gate on a shared driveway in the Northlake Woodlands subdivision. The original DoorKing operator had failed, and the HOA required an exact match for the black powder-coat finish on the replacement rack and pinion drive. We documented the existing hardware before quoting, installed a rebuilt DoorKing 9150 with new safety photocells, and kept the adjacent pedestrian gate working the whole time. The vehicle gate was down less than a day.
Yes, and we treat this seriously. Current safety standards require entrapment protection on automatic gates, regardless of the gate’s age. That means working safety photocells, proper closing force settings, and often a safety edge or reversing mechanism. A gate that reverses only when it hits resistance is dangerous. We’ll inspect yours and bring it up to standard as part of any operator repair. If you’re not sure what your gate has, call (325) 936-1371 and we’ll check it.
The February 2021 deep freeze cracked operator housings and split cedar boards across Coppell, and the failures are still rippling through. Many gates limped through that year and the next two, then failed when the weakened boards and housings finally gave out. We’re seeing a second wave of delayed failures from that freeze right now. If your operator was fine before February 2021 and died after, that’s usually the story.
If you’ve got a gate that’s sagging, grinding, or not opening, don’t wait. Call Gatewood Fence & Gate at (325) 936-1371 for a free estimate. Hal will answer, tell you what’s wrong, and quote you a price before any work starts. That’s how we do it in Coppell.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coppell and the DFW metroplex since 2001.