Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Highland Park?
Our Gate Installation services in Highland Park generally run between $2,800 and $6,500, depending on the material, the complexity of the entry system, and whether we are installing a new gate or retrofitting an existing fence line. Most of our clients in the Highland Park area who choose a custom wrought iron or high-grade cedar gate find themselves right in that middle range, though fully automated systems with heavy-duty motors can push the total toward $8,000 or more if site prep is extensive.
When you call us at (325) 936-1371, we don’t give you a ballpark figure and walk away. We come out, measure your opening, look at the soil conditions common in this part of Texas, and give you an upfront price that covers the labor, the materials, and the final adjustment. You’ll know exactly what you are paying before we ever break ground.
Gate Installation Cost Breakdown (2026)
Pricing for gates in Highland Park isn’t just about the gate panel itself. It’s about the post integrity, the swing radius, and the automation hardware. We break down our quotes so you can see where your money is going, rather than hiding costs behind a “project fee.”
| Gate Type / Component | Estimated Cost Range (Installed) |
|---|---|
| Standard Steel/Iron Pedestrian Gate | $1,200 - $2,200 |
| Custom Ornamental Wrought Iron Driveway Gate | $3,500 - $7,500 |
| Cedar Wood Driveway Gate (Heavy Duty) | $3,000 - $6,000 |
| Gate Automation Motor (LiftMaster/Elite) | $1,800 - $3,500 |
| Access Control (Keypad/Intercom/Loop Sensors) | $600 - $1,200 |
| Post Installation & Concrete Footing | $500 - $900 per post |
What drives these numbers? It’s almost always the ground. Highland Park soil can be deceptive. If we have to dig through heavy clay or hit rock, the foundation work takes longer. A gate that sags in the middle is a gate that wasn’t hung right to begin with. We anchor our posts deep, usually below the frost line for this region, to make sure that when you swing that gate open five years from now, it doesn’t drag on the pavement. If you are looking for a Gate Installation in Highland Park that actually lasts, you have to prioritize the foundation over the fancy scrollwork.
What Affects Gate Installation Pricing in Highland Park
We’ve been doing this since 2001, and we’ve seen every mistake in the book. When you’re budgeting for a new gate, keep these five variables in mind to avoid surprises:
- The Post Foundation: This is the single biggest factor in long-term cost. If we have to pull out an old, rotting post that was set in bad concrete, that adds labor time to the front end of the job. We don’t cut corners here because a gate is only as strong as the post it hangs on.
- Automation Requirements: Adding a motor like a LiftMaster or a Viking system is the biggest hardware expense. If you already have power at the gate location, you save on electrical trenching. If we have to run new lines from your house to the driveway, that’s a separate electrical scope.
- Material Weight and Grade: A lightweight aluminum gate is cheaper to install but might not hold up to the Highland Park winds. A solid steel or heavy cedar gate requires stronger hinges and more substantial posts, which increases the material and labor cost.
- Local Access Control Needs: Do you want a simple keypad, or are you looking for loop sensors that open the gate automatically when you drive up? Every layer of security adds to the final price, but it also changes how you live with the gate daily.
- The “Done Right” Guarantee: When you hire a fly-by-night outfit, you pay for the gate once, and then you pay for the repair six months later when it starts sagging. We build it right the first time, backed by our 90-Day Done Right Promise. You aren’t just paying for the gate; you’re paying for the peace of mind that we will fix it if it’s not perfect.
Safety Warning: High-Tension Components
If you are looking at an existing gate that isn’t closing properly, be careful. Gate systems-especially those with heavy-duty springs or high-tension cables-store a massive amount of mechanical energy. Never try to adjust a tension spring or a cable yourself if you aren’t a trained professional. A slip can cause serious injury. If your gate is acting up, call us at (325) 936-1371. We can come out and assess the tension safely. It’s not worth the risk to your fingers or your property to guess at it.
How to Save on Gate Installation
You don’t need to overpay to get a professional job. We believe in honest, upfront pricing, and we offer a few ways to keep costs manageable without compromising on the quality of the build.
- Take Advantage of Standing Offers: We offer a permanent 10% discount for seniors and veterans. If you are doing a repair alongside your installation, we also take $40 off any repair job over $200.
- Get a Second Opinion: If you’ve received a quote from a national chain that seems high or confusing, call us. We offer a free second opinion on any written estimate. Often, we find that the “big” companies are quoting for parts you don’t need.
- Consolidate the Work: If you need a new gate and a fence repair, do it at the same time. We don’t charge a trip charge inside the county, so it’s more efficient for us to handle everything in one visit, which saves you money on labor.
- Choose Your Features Wisely: You don’t always need the most expensive control system. We can walk you through the difference between a high-end intercom and a reliable, simple keypad to see what actually fits your lifestyle.
If you are still weighing your options, our home page outlines all the services we provide, including our on-site welding capabilities. We prefer to fix what you have if it’s salvageable, rather than pushing you to buy a brand new system you might not need.
FAQs - Gate Installation Cost
How much does it cost to automate an existing manual gate in Highland Park?
Automating an existing gate typically costs between $1,800 and $3,500, depending on the gate’s weight and the type of operator system required. This price includes the motor, safety sensors, and the installation labor. Call (325) 936-1371 for a custom quote based on your specific setup.
Is it cheaper to repair or replace a sagging gate?
In most cases, we can repair a sagging gate for a fraction of the cost of a full replacement, provided the post foundation is still sound. We specialize in on-site welding to straighten and reinforce existing gates, which is usually much more affordable than starting over. Call us to have a look before you decide to tear it down.
Do you charge for estimates in Highland Park?
No, we do not charge for estimates, and we never have. If you have a written estimate from another company, we are happy to provide a free second opinion to ensure you aren’t paying for work you don’t actually need.
Can you install a gate on a sloped driveway?
Yes, we install a Driveway Gate on sloped driveways regularly, but it requires specific hinge setups and potentially a different gate design to ensure it clears the ground as it swings. It adds some complexity to the installation, but we have the experience to make it work reliably. Call (325) 936-1371 to discuss your driveway layout.
How long does a professional gate installation take?
A standard Pedestrian Gate installation usually takes one to two days, depending on the amount of concrete work required for the posts. We show up when we say we will, and we don’t leave until the gate is working perfectly and the site is cleaned up.
Pricing reflects the Highland Park market as of 2026. Gatewood Fence & Gate offers free estimates - call (325) 936-1371.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park since 2001.
What Our Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth