Hinge & Post Repair in Highland Park, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Hinge & Post Repair in Highland Park, TX

Hinge and post repair in Highland Park typically costs between $250 and $600, depending on whether we need to perform on-site welding or reset the concrete footing for the post. If your gate is dragging on the driveway or failing to latch, the issue almost always starts at the hinge or the post, and I can usually get it back to working order in a single visit. At Gatewood Fence & Gate, our Gate Repair specialists focus on fixing the root cause of the sag rather than just patching the symptom.

A gate that does not close properly is more than just an inconvenience; it is a security risk for your home. When you call us at (325) 936-1371, you are speaking to a live person who understands how gates behave in our local climate. I have been at this since 2001, and I have seen enough gates in Highland Park to know that if you fix the panel without addressing the post, you will be doing the job twice. My job is to make sure you only pay for the repair once. You can learn more about our general approach on our home page, or see our specific service capabilities on our Gate Repair in Highland Park page.

When You Need Hinge & Post Repair

Most homeowners assume a sagging gate is a problem with the gate itself, but the physics of a gate are simple. The weight is transferred from the panel to the hinge, and from the hinge to the post. If the post shifts, the gate drops. If the hinge wears out, the gate drops. I look for specific signs before I ever pick up a welder.

• The gate drags on the driveway: This is the most common call I get. It usually means the post has leaned or the bottom hinge has failed, causing the entire frame to tilt.
• The gate fails to latch or lock: If your latch is missing the strike plate by even a quarter of an inch, the gate will not secure. This is almost always caused by the post moving or the hinge pins wearing down.
• Grinding or squeaking noises: Metal-on-metal noise is a clear indicator that your hinge bearings are shot or that the hinges are binding. If you hear this, stop using the gate immediately to prevent the motor from burning out.
• Visible gaps at the post: If you see daylight between the hinge plate and the post, or if the post itself is wobbling when you push on the gate, the structural integrity of your entry is compromised.
• The gate sways in the wind: A properly hung gate should remain steady. If it moves back and forth, the hinges are loose or the mounting bolts have stripped out of the post.

If you notice any of these, call (325) 936-1371. A heavy iron or steel gate can weigh hundreds of pounds. If a hinge snaps while you are operating the gate, that weight is coming down, which is a serious safety hazard. Please do not try to prop it up or force it shut. Let me come out and take a look.

Our Hinge & Post Repair Process

I do not haul your gate off to a shop unless there is absolutely no other choice. My truck is equipped with an on-site welder, which means I can perform Weld & Rust Repair to fix the hinge plates, reinforce the post, and re-hang the gate right in your driveway. We stand behind every repair with our 90-Day Done Right Promise. If it is not done right, I make it right. Here is how we handle a typical repair:

1. Assessment of the Post Integrity: I first check if the post is plumb. In Highland Park, our soil can shift, and if the post has moved, welding a new hinge is just a band-aid. If the post is loose, we address the footing before touching the gate.
2. Inspection of Hinge Hardware: I check the hinge pins and bearings. Sometimes, we replace the hardware with high-quality components from brands like BFT, Linear, or Viking. If the original hinges were under-sized for the weight of the gate, I will swap them for something that can actually handle the load.
3. On-Site Welding and Reinforcement: I use my on-site welder to secure the hinge plates. We often weld gussets or extra steel supports to the post to ensure the hinge is anchored to something solid. This is where the repair lasts, not just looks good for a week.
4. Alignment and Latch Calibration: Once the hinges are set, I align the gate so it hangs perfectly level. We adjust the latch and the strike plate to ensure the gate closes smoothly every single time.
5. Final Safety and Operation Test: I run the gate through several cycles to ensure the hinges move freely and the motor is not straining. I leave when I know it is safe and secure.

Because I am owner-operated, you are dealing with me, Hal Gatewood, from the first call to the final test. I do not have a dispatch queue, and I do not have a sales team trying to upsell you on a new gate when a simple weld will do the job. I have been serving this community since 2001, and I plan on being here for a long time to come.

Hinge & Post Repair Pricing in Highland Park

I believe in upfront pricing. You will never see a surprise charge on your invoice. We offer a permanent 10% discount for seniors and veterans, and if you have a written estimate from another company, I will happily provide a free second opinion. We also offer $40 off any repair over $200 and no trip charge inside the county.

The ranges above cover labor and materials. If I come out and find that the repair is simpler than expected, the price stays low. If the job is more complex, I will tell you exactly why before I start. Call (325) 936-1371 to get an exact quote for your specific setup. Estimates are always free.

FAQs - Hinge & Post Repair

Is it cheaper to repair the hinge or replace the entire gate?

Repairing the hinge and reinforcing the post is almost always significantly cheaper than replacing a gate. Unless the gate frame is rusted through or the post has completely rotted out, our Lock Repair and restoration services can usually return the gate to full function for a fraction of the cost of a new installation. Call (325) 936-1371 for a free estimate so we can take a look at your specific situation.

Can you fix the gate today?

We do our best to provide same-day or next-day service, especially when it comes to security issues like a gate that will not close. Because I am locally owned and answer my own calls at (325) 936-1371, I can usually tell you immediately if I have an opening in the schedule to get out to your house.

Does the 90-Day Done Right Promise apply to welding repairs?

Yes, the 90-Day Done Right Promise applies to every job I perform, including all welding and hinge work. If the hinge fails or the gate sags again within 90 days, you call me, and I come back to make it right. I put this in writing on every invoice because I stand behind my work.

What if my gate is a brand you don’t list?

While I am certified to service major brands like Viking, Ghost Controls, and others, the mechanics of a hinge and post are universal. If it is made of steel or iron, I can weld it and I can hang it, including Automatic Gate Repair work. If you are unsure about your gate type, give me a call at (325) 936-1371 and describe what you are seeing.

If your gate is struggling to open, sagging toward the driveway, or just not latching like it used to, do not wait for the problem to get worse. A loose post today can become a broken hinge tomorrow. I am here to help you get your property secure again with honest, local service. Call (325) 936-1371 today for a free estimate.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park.