Elite Gate Parts & Welding Nationwide | Gatewood Fence & Gate

Elite Gate Parts & Welding in Highland Park: What to Know First

We provide independent Elite gate parts and welding service in Highland Park, Texas, usually completing hinge replacements, post repairs, and custom welding the same week we look at the job. A typical Elite gate parts repair here runs between $240 and $680 depending on what failed, and you’ll know the exact number before we touch anything. If you own an Elite gate in Highland Park and it’s sagging, dragging, or the hinges have given up, call (325) 936-1371 and we’ll come take a look.

Call (325) 936-1371

This page is for Highland Park homeowners with Elite swing or slide gates, Elite slide operators, or Elite cantilever systems. Whether you’ve got a bent rail, a cracked weld, or a post that’s rotted out at the base, we’ll tell you what’s actually wrong, what it costs, and whether the part is worth repairing before replacing.

How Elite Products Fail - and How We Fix Them

Elite makes solid equipment, but every brand has its patterns. Here’s what we see on Elite gates in Highland Park and how we fix it.

• Elite slide gates: the rear roller assembly eats itself in wet years. Elite slide gates ride on steel rollers that take the full gate weight. When the catch basin at the rear of the track holds water, the roller bearings rust, freeze, and start grinding the steel flat. We replace the roller assembly and re-weld the roller plate before it chews the track. You’ll hear it before you see it: a grind that sounds like a train on a bad rail.
• Elite cantilever gates: the counterbalance frame welds crack at the pickup point. Cantilever gates in Highland Park carry their weight on a counterbalance tail. When the main frame weld at the rear pickup cracks, the gate drops a half inch and scrapes the drive. We jig the gate straight, grind out the old weld, and lay in a full-penetration pass. If the crack came from rail rust, we sleeve the rail section first so the repair isn’t cosmetic.
• Elite ornamental swing gates: hinge post failure is the standard kill shot. The gate is steel, but the post is usually wall-thin. Highland Park soil with all that clay and irrigation runoff rots a post from the inside. The hinge plate on an Elite ornamental gate rips away from the post face because the post gave up, not the hinges. We set a thicker wall post in a proper footing, realign the hinge leafs, and weld them true. The gate’s fine; the post wasn’t.
• Elite chain-link slide gates: the mid-rail splice is where it always breaks. We see this every wet spring. The splice where the mid-rail joins near the nose pulls apart under load. We fishplate the joint, weld both sides, and coat it to match. It takes longer to chip off the old failed seam than to weld a proper one.
• Elite proximity opener plates: the operator post and the gate post are two different kinds of steel. When someone welds a mild repair onto a high-carbon anchor plate without preheating, the weld cools too quick and cracks the next month. We preheat, weld with the right rod, and let it cool slow. That’s the difference between a weld that holds and a weld that comes back looking like a hairline crack in a Texas summer.

Our Elite Gate Parts & Welding Process

When you call about an Elite gate that’s failed, here’s how the job goes from start to finish.

1. 1
   You call. A live person answers. You describe what the gate is doing. We set a window that we’ll actually keep.
2. 2
   We show up and diagnose. We look at how the gate hangs, where it binds, and where the weld actually failed. No guesswork, no part swapping as a fee.
3. 3
   We show you what we found. You get the explanation in plain language: which part failed, why, and what happens if it goes another month.
4. 4
   Parts decision. We tell you if OEM Elite parts make sense or if a quality aftermarket equivalent is the better call for your budget. Both get you a written price before work begins.
5. 5
   We do the work. On-site welding or parts replacement, the gate stays in your driveway. We don’t haul it to the shop unless the repair can’t be done in place, which is rare.
6. 6
   We test it and stand behind it. The gate is cycled multiple times, the welds are cleaned and coated, and the job carries our 90-Day Done Right Promise in writing.

What Elite Gate Parts & Welding Costs in Highland Park

Here are real ranges for the Elite jobs we handle most in Highland Park.

• Elite hinge replacement (ornamental or chain-link): $180-$380 per gate, depending on post condition and hinge weight rating.
• Elite post replacement (swing gate): $380-$720 including removal, new post, footing, and re-hanging the gate true.
• Elite rail repair or splice re-weld: $140-$340 depending on rail section length and corrosion extent.
• Custom welding on an Elite gate (cracked frame, picket repair, operator plate): $220-$480 per weld location, based on prep work and weld footage.
• Elite gate roller assembly replacement: $160-$280 per assembly.
• Elite latch and lock replacement: $85-$190 including hardware and adjustment.

The price moves based on three things: post condition, how long the gate has been running out of level, and whether prior welds are in the way. Every price is quoted and agreed before any work starts. Call (325) 936-1371 for a free estimate on your Elite gate in Highland Park.

Why Highland Park Homeowners Call Gatewood Fence & Gate for Elite Work

We’ve been fixing gates in and around Highland Park since 2001. I’m Hal Gatewood, owner and operator. My name is on the shop, my address is published, and I answer the phone with a live person 24 hours a day, 7 days a week. That’s the oldest accountability there is around here.

We work on Elite gates regularly, but we also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. That matters when you’ve got a mixed system or a builder’s hodgepodge. Every job comes with our 90-Day Done Right Promise in writing, background-checked crew on site, and no trip charge inside the county. You’ll get a straight answer and a price before the work starts.

FAQs