Ghost Controls Keypad & Intercom Repair Nationwide | Gatewood Fence & Gate

Ghost Controls Keypad & Intercom Repair: The Highland Park Owner’s Guide

Ghost Controls keypad and intercom repair in Highland Park typically runs $145 to $340 installed, depending on whether we’re replacing the keypad face, the intercom module, or the full entry station. We usually can get you same-day or next-day service, and we keep the most common Ghost Controls keypad parts on the truck. Most folks discover the failure the hard way: they punch in the code, hear a faint click or nothing at all, and then spend ten minutes trying to remember where the manual key release is.

Call (325) 936-1371

If your keypad lights up but won’t trigger the gate, or the intercom rings but you can’t hear visitors, you’re dealing with a Ghost Controls-specific failure pattern. We’ve worked on enough of these in Highland Park to know exactly where they fail first: the membrane keypad, the wiring pigtail, and the intercom speaker cone. Let’s walk through what’s actually failing, what it costs to fix, and whether it’s worth trying yourself.

Which Ghost Controls Models This Applies To

Ghost Controls makes three main entry systems we see in Highland Park driveways: the AXDP (dual gate), AXS1 (single gate), and the newer TSS1 series. The keypad and intercom components cross over between these lines, but there’s a catch: the older AXDP keypads used a 4-wire harness, while the TSS1 moved to a 2-wire data line. If you mix those up, the keypad powers on but the gate controller never hears it. We check the wire count before we touch anything.

For the keypad itself, Ghost Controls uses a weather-sealed membrane that handles Texas heat surprisingly well until the adhesive layer breaks down, usually around year five or six. The intercom is a separate small module with a speaker that’s prone to dry-rot in our Highland Park summers. We stock genuine Ghost Controls OEM parts because the aftermarket options for Ghost specifically are hit-or-miss; the generic universal keypads don’t match the mounting footprint and the wiring protocols don’t line up. On the intercom side, we’ve found that aftermarket speakers actually hold up better than OEM in humid months, so we’re honest with you about which part deserves the Ghost brand and which doesn’t.

Key Takeaways:

• We stock Ghost Controls keypad and intercom parts on the truck for same-day service in Highland Park
• Typical installed price: $145 to $340, quoted and agreed before any work starts
• Our 90-Day Done Right Promise covers every Ghost Controls repair we do, in writing
• We’re independent; not affiliated with Ghost Controls, but we’ve serviced them since 2001

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

• Dead keys or intermittent response: One or more buttons stop registering, or the keypad only works after pressing hard. This is the membrane layer cracking from heat exposure. The keypad still looks fine, but the contact layer underneath has given up.
• Keypad lights up but gate won’t move: The keypad is talking, but the controller isn’t listening. Usually a corroded wire at the pigtail connection, often from moisture wicking up the conduit. We see this constantly in Highland Park homes built in the 80s and 90s.
• Intercom rings but no audio or faint audio: The speaker cone has dried out or the microphone element has failed. Texas heat is rough on thin speaker materials; after four or five summers, the cone gets brittle and stops vibrating cleanly.
• Gate opens on its own or randomly: A keypad with a stuck key or a shorted wire can send phantom signals. This is the one that makes people think their gate is haunted. It’s not; it’s a shorted relay contact.
• Water inside the keypad housing: You can see condensation behind the faceplate. The gasket has failed. This will kill the keypad completely within weeks, sometimes days. If you spot this, call early because the repair gets more expensive when the controller board gets wet too.

Replacement Cost & What’s Included

In Highland Park, a Ghost Controls keypad replacement runs $145 to $210 installed. The intercom module runs $185 to $280 installed. If both fail together, you’re looking at $300 to $340 for the full entry station, which is what we recommend when the housing is cracked or the wiring is suspect. Parts are roughly 60% of the cost; labor is the rest. We’ll tell you the exact number before we order anything or turn a single screw.

Every Ghost Controls repair we do includes a new weatherproof seal, checking the wiring at the controller, and a function test where we run the gate through a full cycle with the new part. The price we quote is the price you pay; nothing changes at the door. And if it’s not right, the 90-Day Done Right Promise means one call brings us back. That’s in writing, on the invoice.

DIY or Call Us?

You can safely check a few things before you call: confirm the gate controller has power, check if the keypad backlight comes on, and look for visible water damage or cracked housing. If you’re comfortable with a multimeter, you can test continuity at the keypad wiring. That’s where it should stop. The keypad and intercom tie into your gate’s control board, and a miswired 4-wire harness can short the controller. A controller board replacement is $400 to $600; that’s an expensive mistake to save $150 on labor.

If you’ve checked the basics and it’s still not working, call us at (325) 936-1371. We’ll bring the part, match it to your Ghost Controls model, and have it done fast. Tell me what it’s doing wrong and I’ll come take a look; here’s my cell.

FAQs