Ghost Controls Gate Parts & Welding Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Parts & Welding in Highland Park: What to Know First

Ghost Controls gate parts and on-site welding in Highland Park typically run $180 to $680 depending on whether we’re replacing a hinge, welding a cracked rail, or rebuilding a post mount that’s given up on life. Most Ghost Controls jobs finish the same day we show up, and we quote the full price before any work starts - no surprises at the door. If you own a Ghost Controls gate opener and the gate itself is sagging, dragging, or refusing to latch, call (325) 936-1371 and the phone gets answered by a real person.

Call (325) 936-1371

This page is for Highland Park homeowners who have a Ghost Controls opener and a gate that’s no longer cooperating. We’re Gatewood Fence & Gate, and we’ve been fixing gates in and around Highland Park since 2001. Hal Gatewood’s name is on the shop, his address is published, and he’s the one you’ll talk to when you call. We’re an independent Ghost Controls service provider - not affiliated with or authorized by Ghost Controls - which means we can use whatever part is actually right for your gate, not just whatever’s in the brand’s catalog.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls makes good openers. But the opener is only half the system. The gate itself - hinges, posts, rails, welds - takes the abuse, and after a few Texas summers, certain failures show up more often than others. Here’s what we see on Ghost Controls jobs in Highland Park:

• Hinge welds breaking on the R Series. The Ghost Controls R Series (RA/RB models) is common on Highland Park driveway gates. The problem isn’t the opener - it’s the hinge brackets. The factory welds are thin at the post mount, and after a few years of a heavy gate cycling twice a day, the weld develops hairline cracks you can’t see until the gate starts dropping. We grind out the old weld and burn in a full-penetration weld on site, so the gate doesn’t have to leave your property.
• Gate sag that starts at the post, not the panel. We get calls where the homeowner thinks the gate frame bent. Most of the time, the hinge post itself has shifted in the ground - clay soil in Highland Park expands and contracts with rain, and a post set in a shallow footer walks over time. We cut the post free, re-set it in a proper depth of concrete, and weld new hinge brackets so the gate closes square against the stop again.
• Drag marks from a failed roller on the TSS1 or TDS2. Ghost Controls TSS1 and TDS2 openers get paired with rolling gates, and when the bottom roller seizes or flattens, the gate motor pulls harder and harder until the limit switch gets confused. You’ll see the gate stop six inches short of the stop, or reverse for no apparent reason. We replace the roller with a sealed-bearing unit that doesn’t mind Highland Park dust, and the opener stops fighting the gate.
• Latch and lock misalignment after hinge work by someone else. We’ve followed other companies’ work in Highland Park and found a fresh hinge welded on without checking the latch line. The gate closes, but the Ghost Controls lock pin doesn’t seat, so the opener thinks the gate is still open and beeps. We check the latch alignment before we weld a single bead, so the whole system - opener, lock, gate - works together when we leave.
• Ground rod corrosion on the gate posts. This one’s specific to older Ghost Controls setups: the original ground rod at the post rusts below grade, and the opener’s safety sensors start false-triggering. A new stainless ground and a welded lug at the post fixes it permanently. Parts are cheap; finding the corrosion is what takes experience.

Our Ghost Controls Gate Parts & Welding Process

Every Ghost Controls job we take in Highland Park follows the same path, and we don’t skip steps just to get to the next call faster.

1. 1
   You call, Hal answers. Tell us what the gate is doing wrong. We ask a few questions about the opener model and what the gate looks like when it fails. We’ll give you an honest idea of what it might be before we even show up.
2. 2
   We come look at it in person. Free second opinion on any written estimate you already have. No trip charge inside the county. Hal shows up, checks the hinges, posts, welds, and the Ghost Controls opener settings as one system.
3. 3
   Parts decision. If the part is a Ghost Controls-specific bracket or opener component, we use OEM. If it’s a hinge, roller, or post bracket, we’ll tell you straight up whether a quality aftermarket part does the same job for less. You get a fixed price before we start.
4. 4
   The repair itself. Most welding happens right in your driveway - the gate stays on your property, and we grind, fit, and weld on site. No hauling the gate off to some shop across town.
5. 5
   Test cycle. We run the Ghost Controls opener through full open and close cycles, check the safety stop, check the latch, and adjust the limit settings if needed. The gate should move like it did when it was new.
6. 6
   The 90-Day Done Right Promise, in writing. If something’s not right within 90 days, one call brings Hal back. That’s not a slogan - it’s printed on your invoice.

What Ghost Controls Gate Parts & Welding Costs in Highland Park

Honest pricing is why people around here keep our number. Here’s what Ghost Controls gate work typically runs in Highland Park:

• Hinge replacement (single hinge, welded on site): $180 - $340
• Post replacement with new concrete footer: $320 - $560
• Rail crack repair (weld + reinforcement gusset): $200 - $380
• Custom welding for a bent or broken gate frame: $280 - $680 depending on layout
• Roller replacement (rolling gate): $120 - $260 per roller, parts and labor
• Latch and lock realignment after hinge or post work: $80 - $180

What moves the price: how far gone the metal is, whether we’re re-using the existing post or setting a new one, and how much grinding the old weld needs before we can lay new. You get the exact number before we touch anything, and if you have a written estimate from anywhere else, bring it - we’ll give you a free second opinion. Call (325) 936-1371 for a specific quote on your gate.

Why Highland Park Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

We’ve been at this since 2001, and we’re still answering our own phone. Hal Gatewood took welding and metal fabrication courses at Eastfield College, then spent the next two-plus decades fixing gates in Highland Park driveways - some of them twice, for the same family, because gates don’t last forever and neither do hinges. You’ll get the person who knows the work, not a rotating cast of strangers. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right.

We service Ghost Controls every week, but we also work on LiftMaster, Mighty Mule, and DoorKing - so when your Ghost Controls opener talks to a gate that someone else installed, we can sort out the whole system without pointing fingers at another brand. $40 off any repair over $200. Permanent 10% discount for seniors and veterans. Tell us what it’s doing wrong and we’ll come take a look - here’s my cell.

FAQs