Ghost Controls Gate Repair Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Repair in Highland Park: What to Know First

Ghost Controls gate repair in Highland Park typically runs $185 to $460 depending on whether we’re replacing a control board, rewiring a limit switch, or rebuilding a hinge post. We’re an independent Ghost Controls service provider, not an authorized dealer, which means we repair before we replace and we don’t pad the ticket with parts you don’t need. Most Ghost Controls repairs in Highland Park happen same day or next morning, and every job carries our 90-Day Done Right Promise in writing. If you’ve got a gate that’s beeping and won’t move, a keypad that’s gone dark, or an opener that reverses for no reason, call (325) 936-1371 and somebody will answer.

Call (325) 936-1371

How Ghost Controls Products Fail - and How We Fix Them

• Control board failure on the TSS1/R series: The single-button transmitter systems (TSS1, TSS1XP) are simple, which is why they last, but their control boards sit in a plastic housing that traps heat in Highland Park summers. What we see is the board working fine all winter, then failing in August when the plastic expands and lets moisture in. We replace with a sealed aftermarket board that costs about $60 less than the OEM part and holds up better in Texas humidity.
• Limit switch drift on the AXHL and AXD series: The high-torque linear arm openers (AXHL, AXD) use mechanical limit switches that vibrate loose over time. The symptom is a gate that opens halfway, stops, and the alarm beeps twice. Owners often think it’s the motor. It’s not. We reset the limits, apply thread-lock, and test the full travel three times. That fix runs $95 to $130, which beats a $300 motor swap any day.
• Battery drain from the “jumper wire chafing” issue: Solar-compatible Ghost Controls kits (R series, TDS2XP) route the battery harness next to the hinge side of the enclosure. After a few thousand open-close cycles, the harness rubs through its insulation against the enclosure wall, which drains the battery overnight. The opener shows a green light but nothing moves. We sleeve the harness, replace the fuse, and warranty the work.
• Pinion gear stripping on the swing-arm actuator: Ghost Controls swing-arm actuators use a cast zinc pinion gear against a steel rack. The gear is designed to be the sacrificial part, which is a good design philosophy, but it means the arm will grind, then stop, and the gate will sag on that side. We stock the rebuild kit and can do it in the driveway in about an hour and a half.
• Photo eye phantom faults from low-hanging tree growth or reflective surfaces: Highland Park’s mature oaks and crape myrtles love to drop branches near gate posts. Ghost Controls photo eyes are sensitive to partial obstructions and direct sun reflections from parked cars. The gate will refuse to close, or close halfway and reverse. We clean and realign the eyes, add hoods if glare is the issue, and if a tree limb is the real culprit, we’ll tell you that too. We don’t sell tree trimming, but we’ll point at the limb and you can call whoever you like.

Our Ghost Controls Gate Repair Process

1. 1
   You call (325) 936-1371. A person answers. You tell us what the gate is doing, or not doing. We ask about the model number if you have it, and we give you a straight answer on whether it sounds like a board issue, a limit switch, a gear, or a hinge post. No script, no transfer.
2. 2
   We come out, same day or next morning. Hal or one of his crew shows up in a marked truck. We don’t haul your gate to a shop. We work in your driveway. You can stand there and watch, or stay inside, either is fine.
3. 3
   We diagnose before we quote. We test the control board, the actuator, the limits, the battery, the photo eyes, and the hinges. We tell you exactly what failed, why it failed, and what the fix costs. The price is agreed before any work starts. If you don’t like the number, you don’t owe us a trip charge inside the county.
4. 4
   Parts: OEM when it matters, quality aftermarket when it’s smarter. Ghost Controls warranties their parts for 18 months, so if your board is still under warranty, we’ll use the OEM part and preserve your claim. If the warranty’s done, we’ll offer an aftermarket option if it’s genuinely better for the Highland Park climate, and we’ll tell you the trade-off in plain English.
5. 5
   We make the repair, on-site welding included. If a hinge ear has pulled loose from the post or the gate has dropped, we weld it while the gate stays in place. We don’t chain the gate back and order parts you don’t need. We fix what’s broken.
6. 6
   We test under real conditions and walk you through what we did. We cycle the gate a dozen times, simulate an obstruction, check the auto-reverse, and watch the limits. Then we show you what we found and what we did. Every job gets the 90-Day Done Right Promise in writing. If something we fixed fails within 90 days of the repair, you call, we come back. No argument, no runaround.

What Ghost Controls Gate Repair Costs in Highland Park

Here’s what we typically see for Ghost Controls work in Highland Park. These are real numbers from our invoices, not national averages pulled from a website:

What moves the price is whether we’re finding one fault or several at once. A gate that’s been limping along for a year often has a worn hinge, a drifted limit, and a photo eye that’s slowly failing, all in the same visit. We’ll show you what’s wrong in order of urgency and you decide what we fix. Estimates are free, and $40 comes off any repair over $200. Call (325) 936-1371 for an exact quote on your opener.

Why Highland Park Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Hal Gatewood has been fixing gates in and around Highland Park since 2001. He grew up about a mile from the Katy Trail corridor and has worked on the same driveway gate twice for the same family. That’s the kind of accountability you can’t get from a company that sends somebody who will never see you again. Our name is on the shop, our address is published, and our license number is there for anyone to look up.

We service Ghost Controls more than most, but we’re also certified on LiftMaster, Mighty Mule, and DoorKing. If your gate turns out to be a Frankenstein of parts from two brands, we’ll sort it out without blinking. Calls are answered by a live person 24/7, not a voicemail. Every job gets the 90-Day Done Right Promise in writing. Seniors and veterans get 10% off permanently. And if you’ve got a written estimate from someone else, we’ll give you a free second opinion.

FAQs