Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLiftMaster Gate Repair in Plano, TX | Gatewood Fence & Gate
We repair LiftMaster gate operators across Plano, from the older CSW200 slide units to current myQ-enabled swing arms, and we also offer Plano Gate Repair as an independent shop, not a manufacturer affiliate. What makes our work different here is simple: we know which failures repeat on Plano lots because the soil moves, the storms surge, and the HOAs want documentation. Call (325) 936-1371 and you’ll get Hal Gatewood or one of his crew, not a phone tree.
Why Plano Residents Choose Us for LiftMaster Service
Hal Gatewood grew up about a mile from the Katy Trail corridor and has been fixing gates around the metroplex since 2001, long enough to have worked on the same driveway gate for the same family twice. He picked up welding and metal fabrication at Eastfield College before deciding he’d rather work outside than in a shop. That background matters when a LiftMaster operator is fighting a gate that’s out of plumb. We know the difference between a board problem and a post problem, and we don’t charge you for the wrong one.
We service all of Plano, from Legacy to Willow Bend to the older 1980s subdivisions east of 75. Our full LiftMaster sales & service work covers motor repair, board diagnosis, limit resets, and full automatic gate fault tracing. Every job gets a written 90-Day Done Right Promise. If it’s not right, Hal comes back. No runaround.
Common LiftMaster Gate Repair Problems We Solve in Plano
- CSW200 / CSW200K slide gates losing limits after rain. Plano sits on Blackland Prairie clay that swells and shrinks with every wet-dry cycle. When the soil moves, the track moves with it. The chain climbs the sprocket, the force limit trips, and the gate either stops mid-travel or rams the stop block. We re-plumb the posts, re-set the track rollers, and re-zero the limit cams so the operator isn’t fighting the ground.
- LA400 / LA500 power board failures after storms. North Texas spring thunderstorms bring power flickers that smoke the transformer and take the main control board with it. Plano’s ice events, like February 2021, made it worse with rolling outages. We keep common LA400 and LA500 boards on hand and can usually get a swing gate closing again the same day.
- Security+ 2.0 photo eyes blinking ten times and holding the gate open. The newer wired photo eyes don’t love a hard freeze. On Plano’s sub-freezing nights, we’ve seen them fail intermittently, showing the ten-blink fault and leaving a gate half-open until morning. Replacing the eye is usually a 45-minute job.
- LA500 swing operators shearing the brass gear. This one shows up on older cedar board-on-board gates from the 1980s and 90s. The DIY install bolted an actuator to a face that’s no longer plumb, so the motor runs max force on every cycle until the internal brass gear gives up. We re-plumb the gate before we touch the operator. Fix the panel without the post and you’ll fix it twice.
- Former DIY installs on 1990s cedar gates with misaligned mounts. Same root cause, different symptom. If the actuator is mounted to a sagging face, the limits drift and the myQ receiver loses pairing. We correct the geometry first, then re-pair the unit.
LiftMaster Service in Plano: What Local Conditions Mean for Your Equipment
Plano has more than 160 HOA-governed neighborhoods, and a big share of the residential gate work we run involves properties where the subdivision committee wants pre-approved cedar or iron before anything gets touched. That’s not true everywhere. In a city with fewer HOAs, you fix the gate and you’re done. Here, you fix the gate, document the repair, and provide before-and-after photos so the homeowner can file them with the management company. We do that at no extra charge because we’d rather have the whole subdivision calling us next time. When we run a LiftMaster board replacement or a post re-plumb in Willow Bend or Legacy, we note the model, board revision, part used, and the plumb measurement. That paperwork is what a drive-through inspection committee actually asks for before they sign off. It also means the next repair on that gate starts from a known baseline, not a guess.
LiftMaster Models & Products We Service in Plano
We work on the full residential and light-commercial LiftMaster gate line: CSW200 and CSW200K slide operators, LA400 and LA500 linear actuator swing arms, CAPXLT and CAPXL heavy-duty units, and Security+ 2.0 myQ-enabled gate and garage operators used on pedestrian gates. We use OEM LiftMaster boards, limit switches, photo eyes, and myQ receivers where safety certification matters. For external wear items like chains, pulleys, and arms, we fit new-equivalent aftermarket parts that match or exceed the original spec, often faster than dealer-only stock. If a CSW200 or LA500 is over 12 years old with a burned main board and a cracked gearbox, we’ll tell you honestly whether replacement beats repair. We’ll show you the failed parts too, not just an error code.
LiftMaster Service Pricing in Plano
Gate repair pricing in Plano depends on what failed and how long the operator has been fighting the soil or the storms. If you’re considering a new system, see our Gate Installation - Plano options. A straightforward photo eye replacement typically runs $120 to $260. A limit reset with track realignment on a CSW200 usually lands between $180 and $320. A main board replacement on an LA400 or LA500, including the OEM part, generally runs $280 to $520. A full diagnosis plus post re-plumbing and operator re-alignment on a sagging 1990s cedar gate often falls between $350 and $750 depending on post condition. Every price is quoted and agreed before we start. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (325) 936-1371 for a free estimate.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - LiftMaster Gate Repair in Plano
The Blackland Prairie clay under your gate posts swells when it rains and shrinks when it dries, pushing the track out of parallel and making the chain climb the sprocket. The operator reads that as an obstruction and trips the force limit, which looks like a lost limit setting. The fix is re-plumbing the posts and re-setting the track rollers, not just clearing the code. Call (325) 936-1371 and we’ll check the post plumb before we touch the board.
Yes, and that’s a common Plano call after spring storms. A surge takes out the transformer and often the main control board with it. We carry LA400 boards locally and can usually restore a swing gate the same day we see it. We’re independent of LiftMaster, which means we diagnose the actual fault and don’t run you through a corporate script. We also handle Liftmaster repair in Dallas for properties just south of our Plano base.
Usually yes. The newer wired Security+ 2.0 eyes don’t handle sustained freezes well, and on Plano’s sub-freezing nights we’ve seen them fail intermittently while showing that ten-blink code. Replacing the eye typically takes under an hour. The gate has to be fixed so it doesn’t hold open overnight again.
Because the actuator is fighting a gate that’s no longer plumb. The brass gear strips after thousands of max-force cycles against a sagging panel, especially on 1980s and 90s board-on-board cedar gates where the post has moved in the clay. We fix the gate geometry first, then replace the gear. Skipping the post work means you’ll replace the gear again in two years.
Depends on what we find when we open it. If the board is burned but the gearbox and drive are sound, a board repair is often the right call and the least expensive one. If the unit is over 12 years old and the gearbox is cracked along with a dead board, we’ll recommend replacement and show you exactly why. You decide from there. Call (325) 936-1371 for a straight diagnosis.
Service Areas Near Plano
In addition to Plano, we run LiftMaster gate service to LiftMaster service in Highland Park, LiftMaster service in Dallas, Richardson, Irving, and Coppell. The same crew, the same 90-Day Done Right Promise. If you’re just outside Plano, check our Plano service area page to confirm coverage.
Book Your LiftMaster Service in Plano Today
Tell me what it’s doing wrong and I’ll come take a look. Call (325) 936-1371 for a free estimate, and we’ll get your LiftMaster gate closing right again, usually same day for repairs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Plano since 2001.