Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Dallas?
Most gate repairs in the Dallas area cost between $150 and $450, depending on whether the issue is a mechanical failure, an electrical component malfunction, or a structural issue with the gate frame itself. Simple adjustments or sensor realignments typically fall on the lower end of that spectrum, while motor replacements or extensive on-site welding for structural sagging often reach the higher end. We provide upfront pricing, so you never have to guess what the final bill will look like when the work is finished.
Gate Repair Cost Breakdown (2026)
When you call us for a quote, we don’t like giving vague “ballpark” figures that change once we arrive at your driveway. We’ve been fixing gates in Dallas since 2001, and we know exactly what parts and labor should cost. Below are the standard price ranges for common gate repairs we handle across the Dallas metro area.
| Service Type | Estimated Cost Range (Dallas) |
|---|---|
| Basic Gate Adjustment & Hinge Tuning | $125 - $225 |
| Gate Operator Sensor/Photo-eye Alignment | $150 - $250 |
| On-Site Welding (Crack/Hinge Repair) | $200 - $400 |
| Gate Opener Control Board Repair | $300 - $650 |
| Gate Motor Replacement (Labor + Hardware) | $800 - $1,800 |
| Safety Loop Repair or Replacement | $250 - $500 |
These prices represent the local market for professional service. If you are seeing quotes significantly lower than this, be careful. Often, those estimates are designed to get a foot in the door, only to have the price jump once the technician starts taking the gate apart. We believe in transparency-my name is on the shop, and I stand behind every invoice.
What Affects Gate Repair Pricing in Dallas
Fixing a gate isn’t just about swapping parts. It’s about understanding how the Dallas climate and the specific soil conditions in our region affect the foundation of your gate post. Here is what typically drives the cost of your repair:
- Soil Movement and Post Foundation: Dallas clay soil shifts significantly between our hot, dry summers and the occasional wet spring. If your gate post has heaved or leaned, realigning the entire structure requires more labor than simply tightening a hinge.
- Brand Compatibility: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Older, proprietary control boards for discontinued models can sometimes be harder to source, which affects the parts cost.
- On-Site Welding Needs: Many companies will tell you a rusted or cracked gate frame needs to be hauled away to a shop. We do on-site welding. This saves you the cost of transport and rental equipment, but it does require specialized labor time in your driveway.
- Safety Code Requirements: Modern safety standards (UL 325) are strict. If your gate is failing because it lacks proper entrapment protection devices, bringing it up to code is a non-negotiable safety requirement, not just an aesthetic upgrade.
- Accessibility and Complexity: A gate that is easy to reach with our service truck is always cheaper to fix than a gate tucked into a tight corner or one with a complex, custom-fabricated iron design that requires specific tools to dismantle.
How to Save on Gate Repair
You don’t need to overpay to get a gate that opens and closes reliably. I’ve seen enough homeowners get taken by national outfits that charge “dispatch fees” just to show up. Here is how you can keep costs reasonable when working with us:
* Take Advantage of Our Standing Offers: We keep it simple. We offer $40 off any repair over $200. If you are a senior or a veteran, you get an additional 10% discount on your service. We don’t ask for haggling; we just apply the discount.
* Avoid the Trip Charge: We do not charge a trip fee if you are inside the county. We are a local business, and we don’t believe in charging you to drive to your house.
* Get a Second Opinion: If another company has already given you a high-pressure quote, call us. We offer free second opinions on any written estimate. If they are overcharging you for parts you don’t need, I will tell you straight.
* Address Small Issues Early: A gate that makes a grinding noise or drags slightly is usually a $150 adjustment. If you wait until the gate falls off the hinges or the motor burns out, you are looking at a much larger repair bill. Call (325) 936-1371 before a minor annoyance becomes a security risk.
FAQs - Gate Repair Cost
How much does it cost to fix a sagging gate in Dallas?
Fixing a sagging gate usually costs between $200 and $450. The cost depends on whether the sag is caused by a loose hinge that needs re-welding or a post that has shifted in the ground. I always inspect the post first, because if the foundation is bad, fixing the gate panel itself is just a temporary patch. Call (325) 936-1371 for an honest assessment of your gate’s structure.
Can you fix my gate today?
We prioritize gate repairs that leave your property unsecured, and we generally offer same-day or next-day service for emergency calls. If your gate is stuck open, it isn’t just an inconvenience; it’s a security risk. A live person answers our phone 24/7, so call (325) 936-1371, and we will get someone out to your location as quickly as possible.
Is it cheaper to repair or replace my gate motor?
For most major brands like LiftMaster, Viking, or DoorKing, repairs are usually cost-effective if the unit is less than 10 years old. If the motor is older and the control board or gear assembly is failing, replacement is often the smarter financial move. We will always give you an honest recommendation on whether a repair will last or if you are throwing good money after bad.
Do you charge for estimates?
We do not charge for estimates for repairs. If you have a written estimate from another company, we are happy to provide a free second opinion. We want you to feel confident in the work being done, and we are happy to explain exactly what is wrong and how we plan to fix it.
What does the 90-Day Done Right Promise cover?
Our 90-Day Done Right Promise covers the labor and parts we install on your gate. If the repair fails or isn’t performing correctly within 90 days, you call us, and we come back to make it right. It is that simple. We don’t hide behind fine print or call centers; I stand behind the work my crew performs.
Why Choose Gatewood Fence & Gate
When you work with us, you aren’t getting a franchise employee who is just punching a clock. You are getting a team that has been serving Dallas since 2001. We believe that a repair-first philosophy is the best way to treat our neighbors. We don’t try to upsell you on a new gate when a simple weld or a sensor adjustment will get your current gate working for another few years.
My name is Hal Gatewood, and I’ve been doing this long enough to know that your time and your security are valuable. When you call (325) 936-1371, you get a real person, not a recording. We show up when we say we will, we use quality parts for the nine major brands we service, and we leave your driveway cleaner than we found it. If you need help with your gate, give us a call. We’ll be there.
Pricing reflects the Dallas market as of 2026. Gatewood Fence & Gate offers Gate Repair with free estimates - call (325) 936-1371. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dallas since 2001.
What Our Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond