Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Far North Dallas
If your gate hinge has sheared off at the post or your rail has separated at the weld, you’re likely dealing with one of two things: Houston Black clay shifting the post out of plumb, or a weld that was never strong enough for a 400-pound ornamental-iron leaf. In Far North Dallas, we see both every week, often on the same gate. Gatewood Fence & Gate has been fixing gates like yours since 2001, and we do it in your driveway, not in some shop across town. We also offer Gate Installation - Far North Dallas for properties needing a full replacement. Call (325) 936-1371 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Far North Dallas’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, and his phone number is the one you call. That matters in Far North Dallas, where HOA boards and homeowners have been burned by outfits that quote one price on the phone and hand you another at the door. Our Gate Parts & Welding team shows up in uniform, gives you a written price before any work starts, and stands behind every job with the 90-Day Done Right Promise. If it’s not done right, one call brings us back. That’s in writing, not in fine print.
We’ve worked inside Bent Tree and Prestonwood enough to know the drill: the architectural review board wants the replacement hinge to match the original ornamental profile, the HOA wants the entry gate back online before the morning rush, and the homeowner just wants a gate that doesn’t bind every August when the clay dries out. We handle all three. You can drive to the shop and look us in the eye, or we’ll come to you. Either way, the person you talk to is the person accountable for the work.
Our Gate Parts & Welding Services in Far North Dallas
Hinge Replacement
Gates in Far North Dallas don’t sag in the middle. They sag at the hinge post, which the Houston Black clay has pushed or pulled out of plumb. We replace hinges with the correct barrel size and leaf thickness for your gate’s weight, and we check the post first. A new hinge on a leaning post is a money pit. We won’t do that to you.
Post Replacement
This is the service we do more than any other in Bent Tree and Prestonwood. A 1980s ornamental-iron gate on a shallow footing with no rebar cage doesn’t stand a chance against Dallas clay that shrinks two inches in a drought and swells after spring rain. We cut the old footing, dig deeper, and set the post in reinforced concrete so it stays where we put it. Then we hang the gate and weld the hardware back to it.
Rail Repair
Bottom rails on swing gates corrode from dew and irrigation overspray, and top rails crack right at the welded joint when the post shifts. We cut out the bad section, true it up, and weld in a matching piece. In Far North Dallas, we match the original ornamental pattern because most HOAs in Prestonwood and Bent Tree require it. It’s not just a repair. It’s the repair that gets past the architectural committee.
Custom Welding
Sometimes the gate needs a new section fabricated. Sometimes a custom latch bracket or a longer hinge leaf solves what a replacement part can’t. We weld on site with portable MIG and TIG equipment, and we’re comfortable matching ornamental scrollwork, finials, and pickets on gates built between 1978 and 1998. If the original pattern is still on the HOA file, we match it. If it’s not, we take measurements and build it close enough that the board signs off.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Far North Dallas
We’re certified to service nine major gate brands, including LiftMaster, FAAC, and BFT operators running on gates across Far North Dallas. We also install and service Far North Dallas Gate Motor & Opener systems for homes throughout the area. Some of those systems are original late-1980s Viking and Elite units still on factory boards, and we keep a healthy stock of parts for them because we know how common they are in Bent Tree and Prestonwood. When a board is obsolete and the post is shifted, we’ll tell you straight: a new LiftMaster operator and a proper post reset will outlast another board swap by years. You get the truth and a written price, not a mystery invoice.
Common Gate Parts & Welding Problems We See in Far North Dallas Homes
- Clay-driven post heave: Houston Black clay shrinks during 100°F+ summer droughts and swells after spring rains, pushing hinge posts out of plumb. The gate binds, the operator overloads, and the weld cracks. Fix the post, then the weld, or you’ll fix it twice.
- Obsolete operator boards on original gates: Late-1980s Viking and Elite swing-gate operators still run on factory circuit boards in Prestonwood and Bent Tree. When the board fails, the real question is whether the post underneath is also shifted. We check both.
- HOA shared-entry equipment failures: Subdivision gates with loop detectors and keypads often fail at the shared equipment, like a stuck safety photocell or a cut loop at the control pedestal. That means every resident’s access is down, not just one driveway, and the HOA needs it fixed before the morning commute.
- Architectural review delays: Replacement hardware that doesn’t match the original finish or footprint can stall a straightforward hinge swap for weeks. We specify the matching ornamental profile from the start so the board approves it the first time.
Pricing for Gate Parts & Welding in Far North Dallas, TX
In Far North Dallas, hinge replacement on a typical ornamental-iron driveway gate runs $180 to $340 per hinge, including the hinge, welding labor, and post plumb check. Post replacement, when the Houston Black clay has shifted the footing, runs $450 to $850 per post depending on depth and concrete requirements. Rail repair with matching ornamental profile runs $150 to $400 per rail. Custom welding for a gate section or specialized bracket runs $120 to $300 depending on complexity and pattern matching. Every price is quoted and agreed on before we start. No shop surprises.
We Also Serve Cities Near Far North Dallas
While this page is written for Far North Dallas homeowners and HOA boards, our crews work throughout the corridor. We regularly serve Highland Park, Dallas, Plano, and Irving, bringing the same 90-Day Done Right Promise and the same on-site welding to every community. Gate Parts & Welding in Far North Dallas is our home turf, and we treat every neighboring city with the same straight talk.
Serving Far North Dallas, TX - Our Local Coverage Area
We’re based in the Far North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Far North Dallas
In most Far North Dallas subdivisions, especially Bent Tree and Prestonwood, the answer is yes for any visible change to the gate, including a replacement post or a welded repair that changes the ornamental profile. We check the architectural guidelines before we start, specify the matching finish and footprint, and in many cases the board signs off on our spec without delay. Call (325) 936-1371 if you’re not sure whether your HOA requires pre-approval. We’ll help you figure it out.
Because the circuit board was never the root cause. The gate post sits on Houston Black clay that expands and contracts with seasonal moisture, shifting the post out of plumb. That binds the gate, the operator works harder, and the board fails again. The actual fix is re-setting the post in a deeper, reinforced concrete footing, often followed by a new operator. We see this exact chain of failure in Prestonwood and Bent Tree more than anywhere else in the metro. A board swap without a post check is a temporary fix.
Look at the hinge post, not the middle of the gate. If the post is still plumb and solid in the ground, a weld repair on the hinge or rail will hold. If the post leans even a degree, or the gap between the gate and the post widens at the top, the post is moving and welding alone will not fix it. In Far North Dallas, on Houston Black clay, we check the post first on every weld call. It’s the only honest way to quote the job.
Yes. We measure the existing scrollwork, pickets, and finials, and we match the profile rather than patching in a generic piece. Many Far North Dallas HOAs keep archival design records, and we work from those when they’re available. If the pattern is no longer on file, we take measurements from the existing gate and fabricate to match. Matching the finish and footprint is standard practice for us in Bent Tree and Prestonwood, not an add-on.
Usually a control fix. A cut loop in the pavement, a failed loop detector in the pedestal, or a stuck safety photocell will stop the gate from opening for residents even when the gate itself is fine. We diagnose the control equipment and the gate hardware at the same time, because a binding gate will overload a loop-driven operator just as quickly as a faulty detector. Our Gate Access Control in Far North Dallas service covers everything from loop detectors to full system upgrades. Call (325) 936-1371 and we’ll sort out which one is the actual culprit.
If your gate is binding, sagging, or welding is failing at the post, we’ll find the root cause and fix it so it stays fixed. Call (325) 936-1371 for a free estimate. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Far North Dallas and surrounding communities since 2001.